From Waste to Strength: Recycled Polypropylene and Activated Carbon Granules in Lime-Stabilized Clay
Authors
Department of Civil Engineering, DAV University Jalandhar, Jalandhar 144012, Punjab, India. (India)
Department of Civil Engineering, DAV University Jalandhar, Jalandhar 144012, Punjab, India. (India)
Department of Civil Engineering, NIT Jalandhar, Jalandhar 144011, Punjab, India. (India)
Article Information
DOI: 10.51583/IJLTEMAS.2026.151000121
Subject Category: Civil Engineering
Volume/Issue: 15/10 | Page No: 1500-1514
Publication Timeline
Submitted: 2026-10-29
Accepted: 2026-11-03
Published: 2026-11-17
Abstract
Weak clays usually don’t have enough strength to meet the requirements of pavements, embankments, or building foundations. This paper investigates if reverse osmosis (RO) filters for households and businesses produce by-products, recycled polypropylene granules (PG) and spent activated carbon granules (ACG), which can be used to stabilize weak, low-plasticity clay (CL). Fourteen mixtures were created using different combinations and proportions of PG (0.5 to 1.5%), ACG (5 to 15%) and a fixed amount of 4% lime with the clay. All mixtures were tested by standard Proctor compaction, and unconfined compressive strength (UCS) tests. To see if any chemical changes occurred between the original and strongest clay mixture, XRD and SEM were used. PG only mixtures showed 0.5% PG yielded the maximum density at 13g/cm³ compared to 1.8g/cm³ and had the least amount of moisture required at 10.53% against 1.6%. Within the lime treated category, ACG mixtures gained the most with 5% ACG and 4% lime at a maximum UCS of 770.81 kN/m², which is 21.0% better than lime alone and 543.9% more than the untreated clay. There was no improvement from adding PG in the presence of lime. The denser packing, along with strong inter-particle contact in addition to the bond lime created, was the reason for this. However, X-ray Diffraction did not reveal the production of new materials. There was only one test performed on each sample; thus, closely related data may require testing of more samples. At this stage, recycled materials appear to have good potential as low-cost stabilizing materials.
Keywords
Clay stabilization; Activated carbon; Recycled polypropylene; Lime; Unconfined compressive strength
This article is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0).
Downloads
References
1. González-Rodríguez, E., Teixeira, W., Ribeiro, V. E. P., Tapia, A. B., & Izzo, R. L. S. (2026). Mechanical behavior of a Guabirotuba Formation soil stabilized with lime, silica fume, and polypropylene fibers. Periodica Polytechnica Civil Engineering. https://doi.org/10.3311/PPci.43469 [Google Scholar] [Crossref]
2. Sharma, A., Singh, K., Senagah, A., Sidhu, N., Tiwary, A. K., Juneja, G., Verma, S. K., Gupta, R., & Joia, P. S. (2026). Performance-based evaluation and UCS prediction of rice husk ash-stabilized expansive subgrade soil using experiments and explainable machine learning. Multiscale and Multidisciplinary Modeling, Experiments and Design, 9, Article 150. https://doi.org/10.1007/s41939-026-01233-7 [Google Scholar] [Crossref]
3. Sridhar, H. N., Shiva Kumar, G., Ramaraju, H. K., Ujwal, M. S., Vinay, A., Pandit, P., et al. (2026). Machine learning framework for predicting and improving the unconfined compressive strength and California bearing ratio of lateritic soil stabilized with industrial wastes. Discover Sustainability, 7, Article 28. https://doi.org/10.1007/s43621-025-02366-4 [Google Scholar] [Crossref]
4. Pasupuleti, L. N., Penugonda, S. K., Danikonda, A. K., & Jyothula, H. (2026). Composite machine learning models for forecasting UCS of stabilized lateritic soils. Multiscale and Multidisciplinary Modeling, Experiments and Design, 9, Article 113. https://doi.org/10.1007/s41939-026-01200-2 [Google Scholar] [Crossref]
5. Baquerizo, J. F. N., Gala, J. A. S., Huaman, A. Q., & Fernandez, M. A. L. (2025). Evaluation of activated carbon from bean waste in improving concrete performance and acceptable properties of soil and subgrades. SSRG International Journal of Civil Engineering, 12(9), 148–163. https://doi.org/10.14445/23488352/IJCE-V12I9P113 [Google Scholar] [Crossref]
6. Navagire, O. P., Srinivasan, V., Patel, A., & Gowrisankar, D. (2025). Stabilization of expansive soils using polypropylene fiber for enhanced engineering properties: A study on black cotton soils from India. Indian Geotechnical Journal. https://doi.org/10.1007/s40098-025-01225-3 [Google Scholar] [Crossref]
7. Rajabi, A. M., Ghorashi, S. M. S., Mohammadrezaei, M. H., & Sadeh, M. (2025). Effect of activated carbon as a stabilizer on geotechnical and microstructural properties of clayey sand soil. International Journal of Engineering, Transactions C: Aspects, 38(6), 1411–1420. https://doi.org/10.5829/ije.2025.38.06c.14 [Google Scholar] [Crossref]
8. Tamassoki, S., Wang, S., Daud, N. N. N., & Roshan, M. J. (2025). Enhanced flexible pavement subgrade stability using activated carbon, coir fiber, and lime. Journal of Rock Mechanics and Geotechnical Engineering. https://doi.org/10.1016/j.jrmge.2025.06.023 [Google Scholar] [Crossref]
9. Arora, S., Kaur, R., Singh, R., & Jassal, S. (2024). Enhancing shear strength in foundational soils, like clayey or sandy soils, using polypropylene fiber. ShodhKosh: Journal of Visual and Performing Arts, 5(3), 929–934. https://doi.org/10.29121/shodhkosh.v5.i3.2024.3323 [Google Scholar] [Crossref]
10. Sari-Ahmed, B., Benzaamia, A., Ghrici, M., & Moghal, A. A. B. (2024). Strength prediction of fiber-reinforced clay soils stabilized with lime using XGBoost machine learning. Civil and Environmental Engineering Reports, 34(2), 157–176. https://doi.org/10.59440/ceer/190062 [Google Scholar] [Crossref]
11. Adedokun, S. I., Ganiyu, A. A., Adebajo, G. O., & Ogundele, A. S. (2024). Comparative effects of selected wastes on the indices and strength properties of laterite soil. Nigerian Journal of Technology, 43(3), 428–435. [Google Scholar] [Crossref]
12. Khatti, J., & Grover, K. S. (2023). Prediction of UCS of fine-grained soil based on machine learning part 1: Multivariable regression analysis, Gaussian process regression, and gene expression programming. Multiscale and Multidisciplinary Modeling, Experiments and Design, 6(2), 199–222. [Google Scholar] [Crossref]
13. Liang, Y., & Knauer, K. M. (2023). Trends and future outlooks in circularity of desalination membrane materials. Frontiers in Membrane Science and Technology, 2, Article 1169158. https://doi.org/10.3389/frmst.2023.1169158 [Google Scholar] [Crossref]
14. Nagaraju, T. V., Bahrami, A., Prasad, C. D., Mantena, S., Biswal, M., & Islam, M. R. (2023). Predicting California bearing ratio of lateritic soils using hybrid machine learning technique. Buildings, 13(1), Article 255. https://doi.org/10.3390/buildings13010255 [Google Scholar] [Crossref]
15. Kumar, S., & Singh, D. (2023). Prediction of UCS and CBR behavior of fiber-reinforced municipal solid waste incinerator bottom ash composites using experimental and machine learning methods. Construction and Building Materials, 367, Article 130230. https://doi.org/10.1016/j.conbuildmat.2022.130230 [Google Scholar] [Crossref]
16. Gajjar, H. V., Raval, H. D., & Andharia, B. R. (2023). Potential use of discarded reverse osmosis (RO) module components as a reinforcement element for enhancing soil strength. Arabian Journal of Geosciences, 16, Article 505. https://doi.org/10.1007/s12517-023-11598-5 [Google Scholar] [Crossref]
17. Khan, S. Z., Rehman, Z. U., Khan, A. H., Qamar, S., & Haider, F. (2022). Effect of polypropylene fibers and cement on the strength improvement of subgrade lying on expansive soil. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 46, 343–352. https://doi.org/10.1007/s40996-021-00790-w [Google Scholar] [Crossref]
18. Safi, W., & Singh, S. (2022). Efficient & effective improvement and stabilization of clay soil with waste materials. Materials Today: Proceedings, 51, 947–955. https://doi.org/10.1016/j.matpr.2021.06.333 [Google Scholar] [Crossref]
19. Meddah, A., Goufi, A. E., & Pantelidis, L. (2022). Improving very high plastic clays with the combined effect of sand, lime, and polypropylene fibers. Applied Sciences, 12(19), Article 9924. https://doi.org/10.3390/app12199924 [Google Scholar] [Crossref]
20. Taffese, W. Z., & Abegaz, K. A. (2022). Prediction of compaction and strength properties of amended soil using machine learning. Buildings, 12(5), Article 613. https://doi.org/10.3390/buildings12050613 [Google Scholar] [Crossref]
21. Tamassoki, S., Daud, N. N. N., Jakarni, F. M., Kusin, F. M., Rashid, A. S. A., & Roshan, M. J. (2022). Compressive and shear strengths of coir fibre reinforced activated carbon stabilised lateritic soil. Sustainability, 14(15), Article 9100. https://doi.org/10.3390/su14159100 [Google Scholar] [Crossref]
22. Hassan, H. J. A., Rasul, J., & Samin, M. (2021). Effects of plastic waste materials on geotechnical properties of clayey soil. Transportation Infrastructure Geotechnology, 8, 390–413. https://doi.org/10.1007/s40515-020-00145-4 [Google Scholar] [Crossref]
23. Liu, J., Li, X., Li, G., & Zhang, J. (2021). Investigation of the mechanical behavior of polypropylene fiber-reinforced red clay. Applied Sciences, 11(22), Article 10521. https://doi.org/10.3390/app112210521 [Google Scholar] [Crossref]
24. Rabab'ah, S. R., Taamneh, M. M., Abdallah, H. M., Nusier, O. K., & Ibdah, L. (2021). Effect of adding zeolitic tuff on geotechnical properties of lime-stabilized expansive soil. KSCE Journal of Civil Engineering, 25(12), 4596–4609. https://doi.org/10.1007/s12205-021-1603-7 [Google Scholar] [Crossref]
25. Kumar, A., & Rupali, S. (2020). Prediction of UCS and STS of kaolin clay stabilized with supplementary cementitious material using ANN and MLR. Advances in Computational Design, 5(2), 195–207. https://doi.org/10.12989/acd.2020.5.2.195 [Google Scholar] [Crossref]
26. Arora, S., & Kumar, A. (2020). Bearing capacity of circular footing resting on fiber-reinforced pond ash overlying soft clay. Journal of Hazardous, Toxic, and Radioactive Waste, 1–9. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000485 [Google Scholar] [Crossref]
27. Ghorbani, B., Arulrajah, A., Narsilio, G., Horpibulsuk, S., & Bo, M. W. (2020). Development of genetic-based models for predicting the resilient modulus of cohesive pavement subgrade soils. Soils and Foundations, 60(2), 398–412. https://doi.org/10.1016/j.sandf.2020.02.010 [Google Scholar] [Crossref]
28. Phanikumar, B. R., & Raju, E. R. (2020). Compaction and strength characteristics of an expansive clay stabilised with lime sludge and cement. Soils and Foundations, 60(1), 129–138. [Google Scholar] [Crossref]
29. Arora, S., & Kumar, A. (2019). Bearing capacity of square footing resting on fibre-reinforced pond ash overlying soft clay. International Journal of Geosynthetics and Ground Engineering, 2–11. https://doi.org/10.1007/s40891-019-0155-0 [Google Scholar] [Crossref]
30. Sharma, T., & Kaushik, R. (2019). Effect of polypropylene fiber on properties of bagasse ash-cement stabilized clay soil. International Journal on Emerging Technologies, 10(2), 255–266. [Google Scholar] [Crossref]
31. Arora, S., & Kumar, A. (2019). Bearing capacity of strip footing resting on fibre-reinforced pond ash overlying soft clay. Innovative Infrastructure Solutions, 2–11. https://doi.org/10.1007/s41062-019-0221-4 [Google Scholar] [Crossref]
32. Al-Soudany, K., Al-Gharbawi, A., & Al-Noori, M. (2018). Improvement of clayey soil characteristics by using activated carbon. MATEC Web of Conferences, 162, Article 01009. https://doi.org/10.1051/matecconf/201816201009 [Google Scholar] [Crossref]
33. Boz, A., Sezer, A., Özdemir, T., Hızal, G. E., & Azdeniz Dolmacı, Ö. (2018). Mechanical properties of lime-treated clay reinforced with different types of randomly distributed fibers. Arabian Journal of Geosciences, 11, Article 122. https://doi.org/10.1007/s12517-018-3458-x [Google Scholar] [Crossref]
34. Moghal, A. A. B., Chittoori, B. C. S., Basha, B. M., & Al-Shamrani, M. A. (2017). Target reliability approach to study the effect of fiber reinforcement on UCS behavior of lime treated semiarid soil. Journal of Materials in Civil Engineering, 29(6), Article 04017014. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001835 [Google Scholar] [Crossref]
35. Sharma, R. K. (2017). Laboratory study on stabilization of clayey soil with cement kiln dust and fibre. Geotechnical and Geological Engineering. https://doi.org/10.1007/s10706-017-0245-5 [Google Scholar] [Crossref]
36. Suman, S., Mahamaya, M., & Das, S. K. (2016). Prediction of maximum dry density and unconfined compressive strength of cement stabilised soil using artificial intelligence techniques. International Journal of Geosynthetics and Ground Engineering, 2, 1–11. [Google Scholar] [Crossref]
37. Zaimoglu, A. S. (2015). Optimization of unconfined compressive strength of fine-grained soils modified with polypropylene fibers and additive materials. KSCE Journal of Civil Engineering, 19(3), 578–582. https://doi.org/10.1007/s12205-015-1425-6 [Google Scholar] [Crossref]
38. Lawler, W., Alvarez-Gaitan, J., Leslie, G., & Le-Clech, P. (2015). Comparative life cycle assessment of end-of-life options for reverse osmosis membranes. Desalination, 357, 45–54. https://doi.org/10.1016/j.desal.2014.10.013 [Google Scholar] [Crossref]
39. Khemissa, M., & Mahamedi, A. (2014). Cement and lime mixture stabilization of an expansive overconsolidated clay. Applied Clay Science, 95, 104–110. https://doi.org/10.1016/j.clay.2014.03.017 [Google Scholar] [Crossref]
40. Karim, A. A. N., Rashid, A. S. A., Noor, Md. N., & Yaacob, H. (2014). Effect of cement stabilized kaolin subgrade on strength properties. Journal of Applied Sciences, 14(8), 842–845. https://doi.org/10.3923/jas.2014.842.845 [Google Scholar] [Crossref]
41. Lekha, B. M., Ravi Shankar, A. U., & Sarang, G. (2013). Fatigue and engineering properties of chemically stabilized soil for pavements. Indian Geotechnical Journal, 43(1), 96–104. https://doi.org/10.1007/s40098-012-0031-5 [Google Scholar] [Crossref]
This work is licensed under CC BY 4.0