A Model for Effective Application of Circular Economy Approach in Waste Management of Building Construction Sites in South East Nigeria
Authors
Itumo I.C.
Department of Building, Nnamdi Azikiwe University, Awka, Nigeria (NG)
Okolie K.C.
Department of Building, Nnamdi Azikiwe University, Awka, Nigeria (NG)
Okoye N.M
Department of Building, Nnamdi Azikiwe University, Awka, Nigeria (NG)
Article Information
DOI: 10.51583/IJLTEMAS.2025.140300014
Subject Category: construction waste management
Volume/Issue: 14/3 | Page No: 109-113
Publication Timeline
Submitted: 2025-04-02
Published: 2025-04-02
Abstract
Abstract: The study presents a model for the effective application of the circular economy approach to waste management on building construction sites in Southeast Nigeria. Employing a qualitative research approach, data was gathered through structured, open-ended interviews conducted with 322 key stakeholders, including contractors, clients, and consultants proportionally distributed across Anambra, Enugu, Abia, Ebonyi, and Imo States. The stakeholders, drawn from a total population of 1,653 building construction professionals, were identified through purposive sampling. The study explored current waste management practices, the primary factors influencing waste generation and disposal, the extent of utilization of recycled materials by construction firms, and the challenges associated with applying circular economy principles. The findings revealed the prevalent use of traditional waste management practices, limited adoption of recycled materials, and significant barriers such as inadequate infrastructure, low stakeholder awareness, and resistance to change. The proposed model integrates circular economy principles to address these issues. Key components of the model include enhancing waste recycling initiatives, integrating waste management plans into project planning, mitigating root causes of waste through infrastructure investment and awareness campaigns, and promoting the reuse of construction and demolition waste as secondary raw materials. The model also emphasizes fostering stakeholder collaboration, developing sustainable urban strategies, and overcoming industry resistance to circular economy adoption. The research concludes by advocating for policy development, capacity building, infrastructure investment, and stakeholder engagement to facilitate the successful implementation of the model. Recommendations for future research and practical strategies for monitoring and evaluation of waste management initiatives are also provided, emphasizing the need for continuous innovation and collaboration in the construction sector. This study offers a significant step toward achieving sustainable waste management practices and advancing the principles of the circular economy within the Nigerian construction industry.
Keywords
Circular economy, Waste management, Construction waste, Construction, demolition waste
This article is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0).
Downloads
References
1. Abila, B., & Kantola, J. (2013). Circular economy: Strategies for industrial waste management. Management of Environmental Quality: An International Journal, 24(4), 415–431. Retrieved from https://www.emerald.com/insight/content/doi/10.1108/14777831311322710/full/html [Google Scholar] [Crossref]
2. Ajayi, S. O. (2015). Design, procurement, and construction strategies for minimizing waste in construction projects. Construction Management and Economics, 33(1), 71–91. Retrieved from https://www.tandfonline.com/doi/abs/10.1080/01446193.2015.1028955 [Google Scholar] [Crossref]
3. Bakshan, A. (2015). Environmental impacts of construction and demolition waste. International Journal of Construction Management, 15(4), 246–253. Retrieved from https://www.tandfonline.com/doi/abs/10.1080/15623599.2015.1086756 [Google Scholar] [Crossref]
4. Blomsma, F., & Brennan, G. (2017). The emergence of circular economy: A new framing around sustainability challenges. Journal of Industrial Ecology, 21(3), 603–614. Retrieved from https://onlinelibrary.wiley.com/doi/full/10.1111/jiec.12603 [Google Scholar] [Crossref]
5. Dogo, H. (2018). Resource utilization and construction waste management: A circular economy perspective. Environmental Economics and Policy Studies, 20(3), 475–488. Retrieved from https://link.springer.com/article/10.1007/s10018-017-0217-3 [Google Scholar] [Crossref]
6. Ezeudu, O. B., & Ezeudu, T. S. (2019). Implementation of circular economy principles in industrial waste management: Case studies and practices. Resources, Conservation and Recycling, 142, 249–261. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0921344919300968 [Google Scholar] [Crossref]
7. Ghisellini, P., Cialani, C., & Ulgiati, S. (2018). A review on circular economy: The expected transition to a balanced interplay of environmental and economic systems. Journal of Cleaner Production, 114, 11–32. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0959652615000512 [Google Scholar] [Crossref]
8. Graedel, T. E., & Allenby, B. R. (2018). Industrial ecology and sustainable engineering (2nd ed.). Upper Saddle River, NJ: Pearson Education. Retrieved from https://www.pearson.com/store/p/industrial-ecology-and-sustainable-engineering/P100000094042 [Google Scholar] [Crossref]
9. Homrich, A. S., Galvao, G., Abadia, L. G., & Carvalho, M. M. (2018). The circular economy umbrella: Trends and gaps on integrating pathways. Journal of Cleaner Production, 175, 525–543. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0959652617325218 [Google Scholar] [Crossref]
10. Kareem, A. A. (2015). Construction and demolition waste: Current management practices. Journal of Environmental Research, 4(2), 17–23. Retrieved from https://www.researchgate.net/publication/276563456 [Google Scholar] [Crossref]
11. Lieder, M., & Rashid, A. (2016). Towards circular economy implementation: A comprehensive review in context to manufacturing industry. Journal of Cleaner Production, 115, 36–51. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0959652615004212 [Google Scholar] [Crossref]
12. Napier, T. R. (2016). Construction waste management: Strategies for sustainable practice. Building Research & Information, 45(4), 319–332. Retrieved from https://www.tandfonline.com/doi/abs/10.1080/09613218.2016.1174245 [Google Scholar] [Crossref]
13. Osobajo, O. A., et al. (2020). Advancing sustainable practices in the construction industry: A critical review. International Journal of Building Pathology and Adaptation, 38(4), 467–486. Retrieved from https://www.emerald.com/insight/content/doi/10.1108/IJBPA-06-2019-0049/full/html [Google Scholar] [Crossref]
14. Pakir, S. S. (2019). Challenges in construction waste estimation and measurement: A global perspective. Waste Management, 95, 237–248. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0956053X1930344X [Google Scholar] [Crossref]
15. Ramli, Z., & Aziz, A. (2017). Building materials surplus and construction waste: A critical analysis. Journal of Construction Engineering and Management, 143(8), 05017006. Retrieved from https://ascelibrary.org/doi/abs/10.1061/(ASCE)CO.1943-7862.0001346 [Google Scholar] [Crossref]
16. Rose, C. M., & Stegemann, J. A. (2018). Circular economy in the built environment: Opportunities for waste reduction and reuse. Resources, Conservation and Recycling, 131, 172–186. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0921344917301942 [Google Scholar] [Crossref]
17. Sertyesilisik, B. (2012). Construction waste management practices and their impact on sustainability. Sustainable Cities and Society, 5, 1–7. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S221067071100041X [Google Scholar] [Crossref]
18. Sehnem, S., Vazquez-Brust, D., Pereira, S. C. F., & Campos, L. M. S. (2019). Circular economy: Benefits and barriers in the context of industry 4.0. Resources, Conservation and Recycling, 140, 315–327. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0921344919300217 [Google Scholar] [Crossref]
19. Thunberg, M., Rudberg, M., & Karrbom, G. (2017). Construction logistics in the circular economy. Journal of Cleaner Production, 164, 841–850. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0959652617301767 [Google Scholar] [Crossref]
20. Tunde, A. M. (2019). Construction and demolition waste: Issues and challenges. Journal of Environmental Engineering and Science, 14(1), 45–53. Retrieved from https://www.nrcresearchpress.com/doi/abs/10.1139/jees-2018-0029 [Google Scholar] [Crossref]
21. Vivian, R. J., et al. (2014). The environmental impact of construction waste. Journal of Environmental Management, 135, 67–73. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0301479713002335 [Google Scholar] [Crossref]
22. Wang, C., & Hanzen, Z. (2016). Cost implications of construction waste management strategies. Construction Economics and Building, 16(1), 27–39. Retrieved from https://epress.lib.uts.edu.au/journals/index.php/AJCEB/article/view/4263 [Google Scholar] [Crossref]
23. Webster, M. D. (2015). Masonry waste management in construction and demolition processes. Waste Management Research, 33(7), 567–574. Retrieved from https://journals.sagepub.com/doi/full/10.1177/0734242X15589134 [Google Scholar] [Crossref]
24. Wu, H. (2016). Environmental impact of construction waste on urban ecosystems. Urban Ecology, 22(3), 233–249. Retrieved from https://www.springer.com/gp/book/9783319318720 [Google Scholar] [Crossref]
25. Wuni, I. Y., & Shen, G. Q. (2022). Construction and demolition waste: A critical analysis. Waste Management & Research, 40(2), 109–125. Retrieved from https://journals.sagepub.com/doi/abs/10.1177/0734242X211030435 [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- Patriarchy and Gender Roles in Shobhaa De's Second Thoughts and Easterine Kire’s Life on Hold
- Comparative Effects of Zeolite and Fly Ash on Soil Properties and Agricultural Productivity
- Assessing Interrelationships among Banking Satisfaction, Cooperative Perspectives and Rural Service Beliefs in Cooperative Banking in Northern Nigeria
- High-Performance Alloys and Composites’ Applications in Production Engineering
- Integrating Tidal Energy into Sub-Saharan Africa’s Power Mix: A Strategic Framework for Renewable Energy Expansion