The Role of Additive Manufacturing in Advancing Lean Production System

Additive Manufacturing (AM), often referred to as 3D printing, is transforming the contemporary manufacturing environment through flexibility enhancement, waste identification and reduction, as well as rapid prototyping enablement. The integration of AM into Lean Production System (LPS) has the potential to improve quality and production efficiency, enhance throughput and profitability, and also minimize resource consumption. This paper systematically explores the synergy between AM and LPS which leads to not just waste reduction, but increases customization and also fosters Just-In-Time (JIT) Manufacturing. It also offers a detailed review of their impact on production processes, sustainability, and scalability. Furthermore, the paper discussed the limitations of AM and provided future directions in adopting AM within lean frameworks, and also emphasized on Industry 4.0 technologies.

additive manufacturing, lean production system, sustainability, industry 4.0, waste reduction, just-in-time

1. Abdel-Jaber, O., Itani, A., and Al-Hussein, M. (2022). Hybrid Lean Decision-Making Framework Integrating Value Stream Mapping and Simulation: A Manufacturing Case Study. 153–163. https://doi.org/10.24928/2022/0118 [Google Scholar] [Crossref]

2. Abhishek Dixit, Vikas Dave, and Alakshendra Pratap Singh. (2015). Lean Manufacturing: An Approach for Waste Elimination. International Journal of Engineering Research And, V4(04). https://doi.org/10.17577/ijertv4is040817 [Google Scholar] [Crossref]

3. Ahmad, A. N. A., Lee, T. C., Ramlan, R., Ahmad, Md. F., Husin, N., and Abdul Rahim, M. (2017). The Hybrid Lean System to Improve Manufacturing Environment. MATEC Web of Conferences, 135, 00050. https://doi.org/10.1051/matecconf/201713500050 [Google Scholar] [Crossref]

4. Akhavan, J., Xu, K., Vallabh, C. K., and Manoochehri, S. (2024, June 17). Real-Time Print Tracking in Metal Additive Manufacturing Using Acoustic Emission Sensors and Vision Transformer Algorithms. Volume 2: Manufacturing Equipment and Automation; Manufacturing Processes; Manufacturing Systems; Nano/Micro/Meso Manufacturing; Quality and Reliability. https://doi.org/10.1115/MSEC2024-125391 [Google Scholar] [Crossref]

5. Ani, M. N. C., Kamaruddin, S., and Azid, I. A. (2022). Enhancement of the efficiency of internal supply chain production system through process-to-process interaction. International Journal of Productivity and Quality Management, 35(3), 332. https://doi.org/10.1504/IJPQM.2022.122294 [Google Scholar] [Crossref]

6. Arteaga Irene, Y. J., and Chan, W. K. V. (2021). Additive Manufacturing Global Challenges in the Industry 4.0 Era (pp. 316–336). https://doi.org/10.1007/978-3-030-90275-9_26 [Google Scholar] [Crossref]

7. Baumers, M., Tuck, C., Wildman, R., Ashcroft, I., and Hague, R. (2011, August). Energy Inputs to Additive Manufacturing: Does Capacity Utilization Matter? University of Texas at Austin. https://doi.org/10.26153/tsw/15275 [Google Scholar] [Crossref]

8. Bevilacqua, M., Ciarapica, F. E., De Sanctis, I., Mazzuto, G., and Paciarotti, C. (2015). A Changeover Time Reduction through an integration of lean practices: a case study from pharmaceutical sector. Assembly Automation, 35(1), 22–34. https://doi.org/10.1108/AA-05-2014-035 [Google Scholar] [Crossref]

9. Bhamu, J., and Singh Sangwan, K. (2014). Lean manufacturing: literature review and research issues. International Journal of Operations and Production Management, 34(7), 876–940. https://doi.org/10.1108/IJOPM-08-2012-0315 [Google Scholar] [Crossref]

10. Boeing. (2020). THE BOEING 2020 ANNUAL REPORT. Boeing, 1–188. https://www.annualreports.com/HostedData/AnnualReportArchive/b/NYSE_BA_2020.pdf [Google Scholar] [Crossref]

11. Driouach, L., Zarbane, K., and Beidouri, Z. (2023). The impacts of additive manufacturing technology on lean manufacturing. Journal of Achievements in Materials and Manufacturing Engineering, 120(1), 22–32. https://doi.org/10.5604/01.3001.0053.9641 [Google Scholar] [Crossref]

12. Ferreira, I. A., Godina, R., and Carvalho, H. (2020). Waste Valorization through Additive Manufacturing in an Industrial Symbiosis Setting. Sustainability, 13(1), 234. https://doi.org/10.3390/su13010234 [Google Scholar] [Crossref]

13. Ford Motors. (2018). FORD 2018 ANNUAL REPORT. Ford, 1–198. https://www.annualreports.com/HostedData/AnnualReportArchive/f/NYSE_F_2020.pdf [Google Scholar] [Crossref]

14. Gibson, I., Rosen, D., and Stucker, B. (2015). Additive Manufacturing Technologies. Springer New York. https://doi.org/10.1007/978-1-4939-2113-3 [Google Scholar] [Crossref]

15. Gibson, I., Rosen, D., Stucker, B., and Khorasani, M. (2021a). Additive Manufacturing Technologies. https://doi.org/10.1007/978-3-030-56127-7 [Google Scholar] [Crossref]

16. Gibson, I., Rosen, D., Stucker, B., and Khorasani, M. (2021b). Additive Manufacturing Technologies. Springer International Publishing. https://doi.org/10.1007/978-3-030-56127-7 [Google Scholar] [Crossref]

17. Gibson, I., Rosen, D., Stucker, B., and Khorasani, M. (2021c). Additive Manufacturing Technologiese (Latest Edi). Springer Nature. https://link.springer.com/book/10.1007/978-3-030-56127-7#keywords [Google Scholar] [Crossref]

18. Guo, N., and Leu, M. C. (2013). Additive manufacturing: technology, applications and research needs. Frontiers of Mechanical Engineering, 8(3), 215–243. https://doi.org/10.1007/s11465-013-0248-8 [Google Scholar] [Crossref]

19. Hou, Q. (2023). Analysis Of Nike Brand Operation and Marketing Strategy in Different Business Periods Based On 4P Marketing Theory. Highlights in Business, Economics and Management, 23, 636–641. https://doi.org/10.54097/zfqbj268 [Google Scholar] [Crossref]

20. Huang, R., Yao, Q., and Liu, Y. (2020). Waste recycling 3D printing and silk-making system. Journal of Physics: Conference Series, 1550(3), 032153. https://doi.org/10.1088/1742-6596/1550/3/032153 [Google Scholar] [Crossref]

21. Huang, Y., Eyers, D. R., Stevenson, M., and Thürer, M. (2021). Breaking the mould: achieving high-volume production output with additive manufacturing. International Journal of Operations and Production Management, 41(12), 1844–1851. https://doi.org/10.1108/IJOPM-05-2021-0350 [Google Scholar] [Crossref]

22. Igbokwe, N. C., Okpala, C. C. and Nwamekwe, C. O. (2024a). The Implementation of Internet of Things in the Manufacturing Industry: An Appraisal. International Journal of Engineering Research and Development, vol. 20, iss. 7, https://www.ijerd.com/paper/vol20-issue7/2007510516.pdf [Google Scholar] [Crossref]

23. Igbokwe, N. C., Okpala, C. C. and Nwankwo, C. O. (2024b). Industry 4.0 Implementation: A Paradigm Shift in Manufacturing. Journal of Inventive Engineering and Technology, vol. 6, iss. 1, https://jiengtech.com/index.php/INDEX/article/view/113/135 [Google Scholar] [Crossref]

24. Ihueze C. C. and Okpala C. C. (2014). The Tools and Techniques of Lean Production System of Manufacturing. International Journal of Advanced Engineering Technology, vol.5, iss. 4 http://technicaljournalsonline.com/ijeat/VOL%20V/IJAET%20VOL%20V%20ISSUE%20IV%20%20OCTBER%20DECEMBER%202014/Vol%20V%20Issue%20IV%20Article%205.pdf [Google Scholar] [Crossref]

25. Ihueze C. C. And Okpala C. C. (2011). A Survey of Optimum Manufacturing Strategy as a Tool for Enhanced Industrial Revenue. Australian Journal of Basic and Applied Sciences http://ajbasweb.com/old/ajbas/2011/December-2011/1321-1329.pdf [Google Scholar] [Crossref]

26. Jafar, M. R., Tripathi, N. M., Yadav, M., and Nasato, D. S. (2024). Additive Manufacturing in the Age of Industry 4.0 and Beyond. In Advances in Pre- and Post-Additive Manufacturing Processes (pp. 213–230). CRC Press. https://doi.org/10.1201/9781003428862-11 [Google Scholar] [Crossref]

27. Khorasani, M., Loy, J., Ghasemi, A. H., Sharabian, E., Leary, M., Mirafzal, H., Cochrane, P., Rolfe, B., and Gibson, I. (2022). A review of Industry 4.0 and additive manufacturing synergy. Rapid Prototyping Journal, 28(8), 1462–1475. https://doi.org/10.1108/RPJ-08-2021-0194 [Google Scholar] [Crossref]

28. Kreiger, M., Anzalone, G. C., Mulder, M. L., Glover, A., and Pearce, J. M. (2013). Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas. MRS Proceedings, 1492, 91–96. https://doi.org/10.1557/opl.2013.258 [Google Scholar] [Crossref]

29. Lakshmanan, R., Nyamekye, P., Virolainen, V.-M., and Piili, H. (2023). The convergence of lean management and additive manufacturing: Case of manufacturing industries. Cleaner Engineering and Technology, 13, 100620. https://doi.org/10.1016/j.clet.2023.100620 [Google Scholar] [Crossref]

30. Leary, M., Downing, D., Lozanovski, B., and Harris, J. (2021). Design principles. In Fundamentals of Laser Powder Bed Fusion of Metals (pp. 119–154). Elsevier. https://doi.org/10.1016/B978-0-12-824090-8.00013-5 [Google Scholar] [Crossref]

31. Leemis, L. (2009). Reliability( Probabilistic Models and Statistical Methods). AscendedIdeas (January 31, 2009), Secon Edit. [Google Scholar] [Crossref]

32. Marzola, A., Mussi, E., and Uccheddu, F. (2020). 3D Printed Materials for High Temperature Applications (pp. 936–947). https://doi.org/10.1007/978-3-030-31154-4_80 [Google Scholar] [Crossref]

33. Mellor, S., Hao, L., and Zhang, D. (2014). Additive manufacturing: A framework for implementation. International Journal of Production Economics, 149, 194–201. https://doi.org/10.1016/j.ijpe.2013.07.008 [Google Scholar] [Crossref]

34. Melter, O., Citek, D., Hvizdal, A., Gabriel, M., Kolisko, J., and Kotes, P. (2024). Development of a Robotic Fabrication System for Cementitious Materials. Mm Science Journal, 2024(3). Https://Doi.Org/10.17973/Mmsj.2024_06_2024041 [Google Scholar] [Crossref]

35. Nwankwo, C. O., Okpala, C. C. and Igbokwe, N. C. (2024). Enhancing Smart Manufacturing Supply Chains Through Cybersecurity Measures. International Journal of Engineering Inventions, vol. 13, iss. 12, https://www.ijeijournal.com/papers/Vol13-Issue12/13120106.pdf [Google Scholar] [Crossref]

36. Oettmeier, K., and Hofmann, E. (2017). Additive manufacturing technology adoption: an empirical analysis of general and supply chain-related determinants. Journal of Business Economics, 87(1), 97–124. https://doi.org/10.1007/s11573-016-0806-8 [Google Scholar] [Crossref]

37. Okpala, S. C. and Okpala, C. C. (2024). The Application of Artificial Intelligence to Digital Healthcare in the Nigerian Tertiary Hospitals: Mitigating the Challenges. Journal of Engineering Research and Development, vol. 20, iss. 4, http://ijerd.com/paper/vol20-issue4/20047681.pdf [Google Scholar] [Crossref]

38. Okpala C. C., Nwankwo C. O., and Onu C. E. (2020), “Lean Production System Implementation in an Original Equipment Manufacturing Company: Benefits, Challenges, and Critical Success Factors” International Journal of Engineering Research and Technology Vol. 9, iss. 7 https://www.ijert.org/volume-09-issue-07-july-2020 [Google Scholar] [Crossref]

39. Okpala C. C. (2014). “Tackling Muda – The Inherent Wastes in Manufacturing Processes” International Journal of Advanced Engineering Technology vol. 5, iss. 4, http://technicaljournalsonline.com/ijeat/VOL%20V/IJAET%20 VOL%20V%20ISSUE%20IV%20%20OCTBER%20DECEMBER%202014/Vol%20V%20Issue%20IV%20Article%202.pdf [Google Scholar] [Crossref]

40. Okpala C. C. (2013a), “The World’s Best Practice in Manufacturing” International Journal of Engineering Research and Technology, vol. 2, iss. 10, http://www.ijert.org/view-pdf/5760/the-worlds-best-practice-in-manufacturing [Google Scholar] [Crossref]

41. Okpala C. C. (2013b), “The Status of Lean Manufacturing Initiatives in The UK Small and Medium Sized Enterprises – A Survey” International Journal of Engineering Research and Technology vol. 2, iss. 10, http://www.ijert.org/view-pdf/5761/the-status-of-lean-manufacturing-initiatives-in-the-uk-small-and-medium-sized-enterprises--a-survey [Google Scholar] [Crossref]

42. Parupelli, S. K., and Desai, S. (2019). A Comprehensive Review of Additive Manufacturing (3D Printing): Processes, Applications and Future Potential. American Journal of Applied Sciences, 16(8), 244–272. https://doi.org/10.3844/ajassp.2019.244.272 [Google Scholar] [Crossref]

43. Pimpalkar, R., and Madgule, M. (2024). Integration of lean manufacturing system with novel intuitive fuzzy syncretic lean frame work to improve the overall equipment effectiveness. Concurrent Engineering, 32(1–4), 46–57. https://doi.org/10.1177/1063293X241296710 [Google Scholar] [Crossref]

44. Qu, M., Guo, Q., Escano, L. I., Nabaa, A., Hojjatzadeh, S. M. H., Young, Z. A., and Chen, L. (2022). Controlling process instability for defect lean metal additive manufacturing. Nature Communications, 13(1), 1079. https://doi.org/10.1038/s41467-022-28649-2 [Google Scholar] [Crossref]

45. Rahito, Wahab, D., and Azman, A. (2019). Additive Manufacturing for Repair and Restoration in Remanufacturing: An Overview from Object Design and Systems Perspectives. Processes, 7(11), 802. https://doi.org/10.3390/pr7110802 [Google Scholar] [Crossref]

46. Saberi, S., Mohd. Yusu, R., Zulkifli, N., and Megat Ahma, M. M. H. (2010). Effective Factors on Advanced Manufacturing Technology Implementation Performance: A Review. Journal of Applied Sciences, 10(13), 1229–1242. https://doi.org/10.3923/jas.2010.1229.1242 [Google Scholar] [Crossref]

47. Santander, P., Cruz Sanchez, F. A., Boudaoud, H., and Camargo, M. (2020). Closed loop supply chain network for local and distributed plastic recycling for 3D printing: a MILP-based optimization approach. Resources, Conservation and Recycling, 154, 104531. https://doi.org/10.1016/j.resconrec.2019.104531 [Google Scholar] [Crossref]

48. Sasson, A., and Johnson, J. C. (2016). The 3D printing order: variability, supercenters and supply chain reconfigurations. International Journal of Physical Distribution and Logistics Management, 46(1), 82–94. https://doi.org/10.1108/IJPDLM-10-2015-0257 [Google Scholar] [Crossref]

49. Sharma, V., Bhanti, P., and Paliwal, M. K. (2024). Development of a fuzzy analytic hierarchy process model, sensitivity analysis, and addressing barriers to additive manufacturing implementation in small- and medium-sized enterprises (SMEs). Journal of Micromanufacturing, 7(2), 190–204. https://doi.org/10.1177/25165984241280839 [Google Scholar] [Crossref]

50. Sousa, M. R. A. de, Alencar, D. B. de, Leite, J. C., and Santos Júnior, H. A. dos. (2024). Integration of Industry 4.0 technologies in industrial manufacturing processes. Revista de Gestão e Secretariado, 15(7), e3844. https://doi.org/10.7769/gesec.v15i7.3844 [Google Scholar] [Crossref]

51. Strong, D., Kay, M., Conner, B., Wakefield, T., and Manogharan, G. (2018). Hybrid manufacturing – integrating traditional manufacturers with additive manufacturing (AM) supply chain. Additive Manufacturing, 21, 159–173. https://doi.org/10.1016/j.addma.2018.03.010 [Google Scholar] [Crossref]

52. Tang, T., Ahire, B., and Li, X. (2023). Scalable Multi-Material Additive Manufacturing of Bioinspired Polymeric Material With Metallic Structures Via Electrically Assisted Stereolithography. Journal of Manufacturing Science and Engineering, 145(1). https://doi.org/10.1115/1.4055793 [Google Scholar] [Crossref]

53. Thomas, D. (2016). Costs, benefits, and adoption of additive manufacturing: a supply chain perspective. The International Journal of Advanced Manufacturing Technology, 85(5–8), 1857–1876. https://doi.org/10.1007/s00170-015-7973-6 [Google Scholar] [Crossref]

54. Tuegel, E., and Penmetsa, R. (2006, May). Risk-Based Design and Certification of Aircraft: A Systems Engineering Approach. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 14th AIAA/ASME/AHS Adaptive Structures Conference 7th. https://doi.org/10.2514/6.2006-2147 [Google Scholar] [Crossref]

55. Wimpenny, D. I., Pandey, P. M., and Jyothish Kumar, L. (2016). Advances in 3D Printing and additive manufacturing technologies. In Advances in 3D Printing and Additive Manufacturing Technologies. https://doi.org/10.1007/978-981-10-0812-2 [Google Scholar] [Crossref]

56. Wohlers. (2021). Wohlers Report 2021. Wohlers Associates. https://wohlersassociates.com/press-releases/new-wohlers-report-2021-finds-7-5-growth-in-additive/ [Google Scholar] [Crossref]

57. Zuo, Z., De Corte, W., Huang, Y., Chen, X., Zhang, Y., Li, J., Zhang, L., Xiao, J., Yuan, Y., Zhang, K., Zhang, L., and Mechtcherine, V. (2024). Strategies towards large-scale 3D printing without size constraints. Virtual and Physical Prototyping, 19(1). https://doi.org/10.1080/17452759.2024.2346821 [Google Scholar] [Crossref]

• Patriarchy and Gender Roles in Shobhaa De's Second Thoughts and Easterine Kire’s Life on Hold
• Comparative Effects of Zeolite and Fly Ash on Soil Properties and Agricultural Productivity
• Assessing Interrelationships among Banking Satisfaction, Cooperative Perspectives and Rural Service Beliefs in Cooperative Banking in Northern Nigeria
• High-Performance Alloys and Composites’ Applications in Production Engineering
• Integrating Tidal Energy into Sub-Saharan Africa’s Power Mix: A Strategic Framework for Renewable Energy Expansion