Bridging the Gap: Strategies to Enhance Building Information Modelling (BIM) Integration in Klang Valley, Malaysia's Construction Industry | IJLTEMAS
00
Days
00
Hrs
00
Min
00
Sec
Submit Your Paper

Bridging the Gap: Strategies to Enhance Building Information Modelling (BIM) Integration in Klang Valley, Malaysia's Construction Industry

Authors

Mariatul Liza Meor Gheda

Faculty of Technology and Applied Sciences, Open University Malaysia, Malaysia (MY)

Rina Raihanee Mohd Tarmidi

Faculty of Technology and Applied Sciences, Open University Malaysia, Malaysia (MY)

Article Information

DOI: 10.51583/IJLTEMAS.2024.131213

Subject Category: CIVIL ENGINEERING

Volume/Issue: 13/12 | Page No: 172-178

Publication Timeline

Submitted: 2025-01-09

Published: 2025-01-09

Abstract

The adoption of Building Information Modelling (BIM) has transformed the architecture, engineering, and construction (AEC) industry by providing a digital platform for integrating project lifecycle information. While BIM has been widely recognised for improving project efficiency, reducing costs, and enhancing communication, its implementation faces persistent challenges that hinder its full adoption, particularly in Malaysia. This study aims to identify the challenges of BIM implementation in construction projects within Klang Valley and to recommend strategies for improving its adoption in construction projects. A mixed-method approach was employed, involving a questionnaire survey distributed to 55 AEC professionals and in-depth interviews with three key stakeholders. The findings highlight that high costs, skill gaps, time constraints, preference for conventional practices, and limited awareness and training are the primary challenges hindering BIM adoption in construction projects, underscoring the need for financial support, capacity-building initiatives, cultural shifts, and improved education to foster wider acceptance and implementation. These challenges highlight the need for targeted initiatives to bridge knowledge gaps, enhance training programmes, and promote the value of BIM to stakeholders. Addressing these issues is crucial to ensuring the successful integration of BIM across construction projects, enabling the industry to maximise its potential benefits. Effective BIM adoption in construction projects requires a combination of comprehensive training, phased implementation, government support, standardisation, and technological advancements, underpinned by national strategies to address challenges, enhance education, and demonstrate BIM’s tangible benefits. This study aims to provide insights that can guide policymakers, industry leaders, and practitioners in overcoming the barriers to BIM adoption, paving the way for a more advanced and efficient construction sector.

Keywords

Building Information Modelling (BIM), architecture, engineering and construction (AEC) industry, construction project, challenges of BIM, BIM adoption strategies

Downloads

References

1. Alsofiani, M. A. (2024). Digitalization in infrastructure construction projects: A PRISMA-based review of benefits and obstacles. [Google Scholar] [Crossref]

2. Anuar, K.F., and Zainal Abidin, M.H.I. (2015). The Challenges in Implementing Building Information Model (BIM) for SME’s Contractor in the Construction Industry. Infrastructure University Kuala Lumpur Research Journal Vol.3 No. 1 2015. [Google Scholar] [Crossref]

3. Chen, H., Li, Y., & Zhao, X. (2019). Data Security in BIM Implementation: Risks and Strategies. Automation in Construction, 106, 102853. [Google Scholar] [Crossref]

4. Construction Industry Development Board. (2019). Malaysia Building Information Modelling Report 2019. [Google Scholar] [Crossref]

5. Construction Industry Development Board. (2021). Malaysia Building Information Modelling (BIM) Report 2021. [Google Scholar] [Crossref]

6. Derek, Thurnell. (2024). 5D BIM Use by Contractors. [Google Scholar] [Crossref]

7. Elmualim, A., & Gilder, J. (2014). An overview of BIM adoption in the construction industry: Benefits and barriers. Emerald Insight. [Google Scholar] [Crossref]

8. Faris, Aiman, Roseli., Nor, Haslinda, Abas., Nur, Qamarina, Ibrahim., Nurul, Hasanah, Mohd, Ta’at. (2024). Barriers of building information modelling (bim) implementation: current perspectives of construction stakeholders in Johor, Malaysia. Journal of Civil Engineering, Science and Technology. [Google Scholar] [Crossref]

9. Haron, N.A., Raja Soh, R.P.Z.A, and Harun, N.A. (2017). Implementation of Building Information Modelling (BIM) in Malaysia: A Review. Pertanika J. Sci. & Technol. 25 (3): 661 – 674. [Google Scholar] [Crossref]

10. Igba, Emmanuel., Edwin, Osei, Danquah., Emmanuel, Adikwu, Ukpoju., Jesutosin, Obasa., Toyosi, Motilola, Olola., Joy, Onma, Enyejo. (2024). Use of Building Information Modeling (BIM) to Improve Construction Management in the USA. World Journal Of Advanced Research and Reviews. [Google Scholar] [Crossref]

11. Ismail, N. H., & Kamal, E. M. (2023). The awareness of implementing building information modelling (BIM) for educators in Malaysia TVET institutions: A systematic literature review. Current Integrative Engineering, 1(1), 1–22. [Google Scholar] [Crossref]

12. Lee, K. (2020). Impact of BIM on Project Delivery: Overcoming Resistance and Integration Issues. International Journal of Project Management, 38(3), 123-134. [Google Scholar] [Crossref]

13. Mamter, S., Abdul Aziz, A. R., & Zulkepli, J. (2019). Intervention model of low BIM adoption in Malaysia: A need for learning institution precedence. International Journal of Recent Technology and Engineering, 8(2S), 514–518. [Google Scholar] [Crossref]

14. Mamter, S., Abdul Aziz, AR., and Mamat, ME. (2017). Stimulating a Sustainable Construction through Holistic BIM Adoption: The Root Causes of Recurring Low BIM Adoption in Malaysia. International Conference on Civil Engineering and Materials Science. [Google Scholar] [Crossref]

15. Munianday, P., Abdul Rahman, R., & Esa, M. (2023). Case study on barriers to building information modelling implementation in Malaysia. Journal of Facilities Management, 21(4), 511–534. [Google Scholar] [Crossref]

16. National Institute of Building Sciences. (2022). U.S. National BIM Program: Implementation Plan. Retrieved from [Google Scholar] [Crossref]

17. Radzia, A. R., Azmi, N. F., Kamaruzzaman, S. N., Algahtany, M., & Rahman, R. A. (2024). Challenges in construction readiness for BIM-based building projects. Journal of Asian Architecture and Building Engineering, 23(1), 123-134. [Google Scholar] [Crossref]

18. Rami, Chmeit., Junpeng, Lyu., Michael, Pitt. (2024). Implementation Challenges of Building Information Modelling (BIM) in Small to Medium-Sized Enterprises (SMEs) Participating in Public Projects in Qatar. [Google Scholar] [Crossref]

19. Rekve, N. (2023). Understanding 'resistance to change' for BIM adoption and new research ways forward. In Proceedings of the 20th International Conference on Computing in Civil and Building Engineering. [Google Scholar] [Crossref]

20. Sardroud, J. M., Mehdizadehtavasani, M., Khorramabadi, A., & Ranjbardar, A. (2018). Barriers analysis to effective implementation of BIM in the construction industry. Proceedings of the 35th ISARC, 64–71. [Google Scholar] [Crossref]

21. Siebelink, S., Voordijk, H., Endedijk, M., & Adriaanse, A. (2020). Understanding barriers to BIM implementation: Their impact across organisational levels in relation to BIM maturity. Frontiers of Engineering Management, 8, 236–257. [Google Scholar] [Crossref]

22. Smith, D. K., & Tardif, M. (2009). Building Information Modeling: A Strategic Implementation Guide. Wiley. [Google Scholar] [Crossref]

23. Smith, J. (2021). Challenges and Barriers of BIM Adoption. Journal of Construction Engineering and Management, 147(6), 04021052. [Google Scholar] [Crossref]

24. Taat, N. H. M., Abas, N. H., & Hasmori, M. F. (2022). The barriers of building information modelling (BIM) for construction safety. In Proceedings of the 3rd International Conference on Green Environmental Engineering and Technology (pp. 121–130). Springer. [Google Scholar] [Crossref]

25. Tan, Tan., Grant, Mills., Xiaolin, Ma., Eleni, Papadonikolaki. (2024). Adoption challenges of building information modelling (BIM) and off-site construction (OSC) in healthcare construction: are they fellow sufferers?. Engineering, Construction and Architectural Management. [Google Scholar] [Crossref]

26. The, Van, Tran., Hoa, Van, Vu, Tran., Tuan, Anh, Nguyen. (2024). A Review of Challenges and Opportunities in BIM Adoption for Construction Project Management. Engineering Journal. [Google Scholar] [Crossref]

27. Ullah, K., Lill, I., & Witt, E. (2019). An overview of BIM adoption in the construction industry: Benefits and barriers. Emerald Insight. [Google Scholar] [Crossref]

28. Xiongzhi, Cao., Maoli, Lan., Yaxin, Li., Siyu, Wang., Li, Zhao., Hou, Yong., Lian, Li., Xinyuan, Cao., Yang, Xiang., Yujie, Zhang. (2024). From Theory to Practice: Challenges and Countermeasures for the Implementation of BIM and Intelligent Construction Technology. International Journal of Education and Humanities. [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles

Engineering,
Management &
Applied Science
Journal
(IJLTEMAS)
Published by RSIS International
Tower B, Suncity Success Tower
Golf Course Ext Rd, Sector 65
Gurugram, Haryana 122101, India
© 2026 IJLTEMAS · RSIS International. Published under CC BY 4.0. ISSN 2278-2540.