Evaluating the Effectiveness of Current Safety Practices and Sustainable Solutions in Reducing Construction Site Fatalities in North-West Nigerian Tertiary Institutions

Abstract: This paper aims to evaluate the current safety practices and their impact on the reduction of accidents and fatalities in construction sites in North-West Nigeria tertiary institutions. To achieve this aim, the study, through a survey design, draws a sample of forty-two respondents comprising a chief builder, director of works, physical planners and project supervisors using a convenience sampling technique. To obtain pertinent data, a 5-point Likert scale questionnaire was administered to participants and the collected data were analyzed using the relative importance index using the Statistical Package for Social Science (SPSS) version 17. However, findings from the analysis show that; the adoption of comprehensive and sustainable safety practices at construction sites significantly mitigates risks, safeguards the well-being of their workers, enhances project efficiency, and bolsters their overall reputation. Hence, there is a need for continuous improvement in safety standards, emphasizing proactive measures such as robust safety training and strict adherence to safety protocols. More so, integrating safety considerations into all phases of project management emerges as crucial for achieving sustainable safety outcomes.

Accidents and fatalities, safety practices, construction sites, Tertiary institutions, North-West Nigeria

1. Abubakar, M. A., Zailani, B. M., Abdullahi, M., & Auwal, A. M. (2022). Potential of adopting a resilient safety culture toward improving the safety performance of construction organizations in Nigeria. Journal of engineering, design and technology, 20(5), 1236-1256. [Google Scholar] [Crossref]

2. Ahmad, N. I., Ab-Kadir, M. Z. A., Izadi, M., Azis, N., Radzi, M. A. M., Zaini, N. H., & Nasir, M. S. M. (2018). Lightning protection on photovoltaic systems: A review on current and recommended practices. Renewable and Sustainable Energy Reviews, 82, 1611-1619. [Google Scholar] [Crossref]

3. Ahmed, S. (2019). Causes and effects of accident at construction site: A study for the construction industry in Bangladesh. International journal of sustainable construction engineering and technology, 10(2), 18-40. [Google Scholar] [Crossref]

4. Aiyewunmi, T. (2023). Challenges and potential solutions to pluvial flood risk in urban tropical African communities, a case study using Ijebu-Ode, in South West Nigeria (Doctoral dissertation, University of Liverpool). [Google Scholar] [Crossref]

5. Ajmal, M., Isha, A. S. N., Nordin, S. M., & Al-Mekhlafi, A. B. A. (2022). Safety-management practices and the occurrence of occupational accidents: Assessing the mediating role of safety compliance. Sustainability, 14(8), 45-69. [Google Scholar] [Crossref]

6. Alarcón, L. F., Acuña, D., Diethelm, S., & Pellicer, E. (2016). Strategies for improving safety performance in construction firms. Accident Analysis & Prevention, 94, 107-118. [Google Scholar] [Crossref]

7. Albarkani, M. S. S., & Shafii, H. (2021). Construction Safety and Performance in Malaysian Construction Industry: A Review. Journal of Technology Management and Business, 8(2), 79-93. [Google Scholar] [Crossref]

8. Amirah, N. A., Him, N. F. N., Rashid, A., Rasheed, R., Zaliha, T. N., & Afthanorhan, A. (2024). Fostering a Safety Culture in Manufacturing Industry through Safety Behavior: A Structural Equation Modelling Approach. Journal of Safety and Sustainability. [Google Scholar] [Crossref]

9. Asanka WA, Ranasinghe M. (2015). Study on the impact of accidents on construction projects. In 6th International Conference on Structural Engineering and Construction Management, 58–67. [Google Scholar] [Crossref]

10. Aridi, A. S., Burrell, D. N., Finch, A., Burton, S. L., Quisenberry, W. L., Jones, L. A., ... & Mondala-Duncan, M. (2024). Coaching Cybersecurity Project Managers and Cyber-security Engineers. In Evolution of Cross-Sector Cyber Intelligent Markets (pp. 356-377). IGI Global [Google Scholar] [Crossref]

11. Azil, N. A. S., & Jabar, I. L. (2021). A Preliminary Survey nn Safety Practices At Construction Site: Towards Safe Environment For Public. Journal of Tourism Hospitality and Environment Management, 6 (26), 300-310. [Google Scholar] [Crossref]

12. Bathan, J., & Joy, C. A. (2023). Modelling the mediating effects of occupational safety and health management between organization culture and business performance among employees of construction companies. International Journal of Open-Access, Interdisciplinary & New Educational Discoveries of ETCOR Educational Research Center (iJOINED ETCOR), 2(4), 131-156. [Google Scholar] [Crossref]

13. Brahmachary, T. K., Ahmed, S., & Mia, M. S. (2018). Health, safety and quality management practices in construction sector: A case study. Journal of System and Management Sciences, 8(2), 47-64. [Google Scholar] [Crossref]

14. Burns, M. G. (2019). Managing energy security: an all hazards approach to critical infrastructure. Routledge. [Google Scholar] [Crossref]

15. Chan, A. P. C., Yang, Y., & Darko, A. (2018). Construction accidents in a large-scale public infrastructure project: Severity and prevention. Journal of Construction Engineering and Management, 144(10), 05018010. [Google Scholar] [Crossref]

16. Chen, S. Y., Wu, W. C., Chang, C. S., Lin, C. T., Kung, J. Y., Weng, H. C., ... & Lee, S. I. (2015). Organizational justice, trust, and identification and their effects on organizational commitment in hospital nursing staff. BMC health services research, 15, 1-17. [Google Scholar] [Crossref]

17. Echavaria, F., & Espiritu, J. Q. (2024). Firefighting Capabilities and Performance of the Bureau of Fire Protection-Marinduque in Responding to Fire Incidence: Basis for Service Delivery Framework. Psychology and Education: A Multidisciplinary Journal, 18(1), 41-68. [Google Scholar] [Crossref]

18. Famakin, I. O., Aigbavboa, C., & Molusiwa, R. (2023). Exploring challenges to implementing health and safety regulations in a developing economy. International Journal of Construction Management, 23(1), 89-97. [Google Scholar] [Crossref]

19. Forbes, L. H., & Ahmed, S. M. (2010). Modern construction: lean project delivery and integrated practices. CRC press. [Google Scholar] [Crossref]

20. Fowler, D., & Tiemeyer, B. (2006). Safety Case Development-a Practical Guide. In Developments in Risk-based Approaches to Safety: Proceedings of the Fourteenth Safety-critical Systems Symposium, Bristol, UK, 7–9 February 2006 (pp. 105-137). Springer London. [Google Scholar] [Crossref]

21. Fu, G., Xie, X., Jia, Q., Li, Z., Chen, P., & Ge, Y. (2020). The development history of accident causation models in the past 100 years: 24Model, a more modern accident causation model. Process Safety and Environmental Protection, 134, 47-82. [Google Scholar] [Crossref]

22. Gambatese, J. A. (2000). Owner involvement in construction site safety. In Construction Congress VI: Building Together for a Better Tomorrow in an Increasingly Complex World (pp. 661-670). [Google Scholar] [Crossref]

23. Garba, U., Ibrahim, D., & Karem, W. B. (2022). Utilization of Safety Facilities in Building Construction Sites in Federal Capital Territory Abuja and Niger State, Nigeria. Journal of Sustainability and Environmental Management, 1(2), 144-150. [Google Scholar] [Crossref]

24. Giri, O. P. (2023). An Overview of Safety and Health Management Challenges in The Construction Industry. Available at: http://10.5281/zenodo.8251525 (Accessed: 23 September 2024). [Google Scholar] [Crossref]

25. Grzebieta, R. H. (2015). Welcome to Safety—A New Open Access Journal Helping Shape a Safer World. Safety, 1(1), 1-6 [Google Scholar] [Crossref]

26. Hamid, A. R. A., Abd Majid, M. Z., & Singh, B. (2008). Causes of accidents at construction sites. Malaysian journal of civil engineering, 20(2). [Google Scholar] [Crossref]

27. Ind, N. (2007). Living the brand: How to transform every member of your organization into a brand champion. Kogan Page Publishers [Google Scholar] [Crossref]

28. Keng, T. C., & Razak, N. A. (2014). Case studies on the safety management at construction site, Journal of Sustainability Science and Management, 9(2), 90-108. [Google Scholar] [Crossref]

29. Lipinski, T., Ahmad, D., Serey, N., & Jouhara, H. (2020). Review of ventilation strategies to reduce the risk of disease transmission in high occupancy buildings. International Journal of Thermo fluids, 7, 100045. [Google Scholar] [Crossref]

30. Lombardi, M., Mauro, F., Berardi, D., & Galuppi, M. (2023). Occupational road safety management: a preliminary insight for a landfill remediation site. Buildings, 13(5), 1238 [Google Scholar] [Crossref]

31. Lizák, L., & Etemova, E. (2023). The Socio-Economic Determinants of Crime in Sweden, 2015-2020. [Google Scholar] [Crossref]

32. Manuele, F. A. (2003). On the practice of safety. John Wiley & Sons. [Google Scholar] [Crossref]

33. Marchiori, R., Song, S., Ajasa, S., & Lyu, P. (2024) Assessing Usability, Frequency, and Efficiency of Fall Hazard Prevention Devices in Construction: Development of a Comprehensive Questionnaire for Evaluation. In Construction Research Congress 2024 (pp. 518-527). [Google Scholar] [Crossref]

34. Martin, H., Mohan, N., Ellis, L., & Dunne, S. (2021). Exploring the role of PPE knowledge, attitude, and correct practices in safety outcomes on construction sites. Journal of Architectural Engineering, 27(4), 05021011 [Google Scholar] [Crossref]

35. Muthuswamy, V. V., & Sudhakar, B. (2023). Project Performance: Role of Operational Safety, Health Performance and Safety Preparation. Operational Research in Engineering Sciences: Theory and Applications, 6(1). [Google Scholar] [Crossref]

36. Nagarajan, M., & Ganapathi, R. (2024). Factor's determining successful risk management in construction projects. International Journal of Process Management and Benchmarking, 16(4), 512-532. [Google Scholar] [Crossref]

37. Ni, G., Zhang, Q., Fang, Y., Zhang, Z., Qiao, Y., Wang, W., & Deng, Y. (2023). How resilient safety culture correct unsafe behaviour of new generation of construction workers: The mediating effects of job crafting and perceived work meaningfulness. Engineering, Construction and Architectural Management, 30(10), 4821-4845. [Google Scholar] [Crossref]

38. Nnaji, C., Okpala, I., & Awolusi, I. (2020). Wearable sensing devices: Potential impact & current use for incident prevention. Professional safety, 65(04), 16-24. [Google Scholar] [Crossref]

39. Oni, O., Olanrewaju, A., & Cheen, K. S. (2022). Accidents at Construction Sites and Near-Misses: A Constant Problem. Proceedings of International Structural Engineering and Construction, 9, 2 [Google Scholar] [Crossref]

40. Robla-Gómez, S., Becerra, V. M., Llata, J. R., Gonzalez-Sarabia, E., Torre-Ferrero, C., & Perez-Oria, J. (2017). Working together: A review on safe human-robot collaboration in industrial environments. Ieee Access, 5, 26754-26773. [Google Scholar] [Crossref]

41. Rostamnezhad, M., & Thaheem, M. J. (2022). Social Sustainability in Construction Projects—A Systematic Review of Assessment Indicators and Taxonomy. Sustainability, 14(9), 5279 [Google Scholar] [Crossref]

42. Samsudin, N. S., Mohammad, M. Z., Khalil, N., Nadzri, N. D., & Ibrahim, C. K. I. C. (2022). A thematic review on Prevention through design (PtD) concept application in the construction industry of developing countries. Safety science, 148, 105640. [Google Scholar] [Crossref]

43. Singh, A., & Misra, S. C. (2021). Safety performance & evaluation framework in Indian construction industry. Safety science, 134, 105023. [Google Scholar] [Crossref]

44. Sulong, A. W., Hassan, A., Mohamed, T. & Raja, A. (2019). Guidelines on Safe Work Practice when Commuting in Oil Palm Plantations (2), 222–228. [Google Scholar] [Crossref]

45. Shi, W., & Xie, Y. (2024). From knowledge to success: understanding the crucial role of governance, tacit knowledge sharing, and team leadership in project outcomes. Current Psychology, 43(9), 8219-8229 [Google Scholar] [Crossref]

46. Vincoli, J. W. (2024). Basic guide to system safety. John Wiley & Sons [Google Scholar] [Crossref]

47. Xu, J., Cheung, C., Manu, P., & Ejohwomu, O. (2021). Safety leading indicators in construction: A systematic review. Safety science, 139, 105250. [Google Scholar] [Crossref]

48. Yap, J. B. H., Skitmore, M., Lam, C. G. Y., Lee, W. P., & Lew, Y. L. (2024). Advanced technologies for enhanced construction safety management: investigating Malaysian perspectives. International Journal of Construction Management, 24(6), 633-642. [Google Scholar] [Crossref]

49. Yar Adua, I. S. (2022). The Effects of Security Threats on the Operations of Construction Sites in Northern Nigeria: A Case Study of Katsina State, Journal of Multidisciplinary Engineering Science Studies (JMESS), 8(4), 4484-4489. [Google Scholar] [Crossref]

50. Yusoff, S., Nordin, R., & Yusoff, H. (2015). Environmental Management Systems (EMS) ISO 14001 implementation in construction industry: A Malaysian case study. Issues in Social & Environmental Accounting, 9(1) [Google Scholar] [Crossref]

51. Zaini, N. Z. M., Hasmori, M. F., Moayedi, F., Abas, N. H., & Klufallah, M. (2023, October). Causes of the tower crane accident and safety performance practices at construction site in Malaysia: A perspectives from the tower crane operator. In AIP Conference Proceedings (Vol. 2881, No. 1). AIP Publishing. [Google Scholar] [Crossref]

• Assess the Dilemma between the Use of Conventional and Unconventional Energy in Nigerian Shallow Water Oil Fields
• Modeling and Simulation of ‘Univariate and Multivariate analytics’ by applying ‘Deep Learning and Machine Learning’ Application of Support Vector Regression, Random Forest, K-Nearest Neighbors, Long Short-Term Memory and Gated Recurrent Units Algorithms f
• The Effects of Integrating Information and Communication Technology (ICT) In Teaching the Atomic Structure in Chemistry among Senior High School Students
• An Assessment of the Impact of Poor Indoor Air Quality on Public Health in Nigerian Urban Environments; Case Study of FCT, Abuja
• Optimizing Building Envelope Design for Cooling Loads Reduction in Abuja