00
Days
00
Hrs
00
Min
00
Sec
Submit Your Paper

Air Quality Monitoring Using MQ135 Gas Sensor and Arduino Uno

Authors

Manoj kumar

Department of Electrical Engineering IIMT College of Polytechnic (IN)

Garvit Mishra

Department of Electrical Engineering IIMT College of Polytechnic (IN)

Ayush Sharma

Department of Electrical Engineering IIMT College of Polytechnic (IN)

Ashish Shaini

Department of Electrical Engineering IIMT College of Polytechnic (IN)

Sahil Saxena

Department of Electrical Engineering IIMT College of Polytechnic (IN)

Article Information

DOI: 10.51583/IJLTEMAS.2025.140500119

Subject Category: Industrial Eninneering

Volume/Issue: 14/5 | Page No: 1097-1101

Publication Timeline

Submitted: 2025-06-28

Published: 2025-06-28

Abstract

Abstract: This paper presents the design and implementation of an air quality monitoring system based on an MQ135 gas sensor and an Arduino Uno microcontroller. The MQ135 sensor detects common pollutants (e.g. CO₂, NH₃, benzene, smoke) by measuring changes in air conductivity, and its analogy output is processed by the Arduino board. Sensor readings are calibrated against known conditions, and then converted to parts-per-million (PPM) levels. The system displays real-time air quality readings on an LCD and can trigger alerts when thresholds are exceeded. Data collection and analysis are demonstrated through sample readings in different environments. The system’s accuracy, limitations, and potential improvements (such as IOT connectivity, mobile apps, and machine learning) are discussed. This project shows that a low-cost MQ135/Arduino platform can provide continuous air quality data for environmental monitoring.

Keywords

Air quality monitoring, MQ135 gas sensor, Arduino Uno, gas concentration, environmental sensor, IOT

Downloads

References

1. K. Chenchireddyet al., "Air Quality Monitoring and Alert System Using MQ135 Gas Sensor with Arduino Controller," Int. J. of Research Publication and Reviews, vol. 3, no. 10, pp. 2020–2026, Oct. 2022. [Google Scholar] [Crossref]

2. D. H. Hareva and C. D. P. Marsyaf, "Air Quality Monitoring at Pelita Harapan University Using the MQ-135 Sensor," in Proc. of the 2019 ACM Int. Conf. on Environmental and Public Health, 2019. [Google Scholar] [Crossref]

3. A. Choudhary, "Measuring CO₂ Concentration in Air using Arduino and MQ-135 Sensor," Circuit Digest, Nov. 2020. [Online]. Available: https://circuitdigest.com/microcontroller-projects/interfacing-mq135-gas-sensor-with-arduino [Google Scholar] [Crossref]

4. Zhengzhou Winsen Electronics Tech. Co., Ltd, "MQ135 Semiconductor Sensor for Air Quality – Technical Data Sheet, Ver. 1.4, 2019. [Online]. Available: [Google Scholar] [Crossref]

5. https://www.winsen-sensor.com/d/files/PDF/Semiconductor%20Gas%20Sensor/MQ135%20 (Ver1.4) %20-Manual.pdf [Google Scholar] [Crossref]

6. CO2Meter, "Carbon Dioxide (CO₂) Levels Chart," CO2Meter.com. [Online]. Available: [Google Scholar] [Crossref]

7. https://www.co2meter.com/blogs/news/carbon-dioxide-indoor-levels-chart. Accessed May 15, 2025. [Google Scholar] [Crossref]

8. M. Mohiddin et al., "A Low-Cost Air Quality Monitoring Sensor System with Arduino Uno," Advances in Industrial Engineering and Management, vol. 7, no. 2, pp. 22–29, 2018. [Google Scholar] [Crossref]

9. System Effectiveness. (n.d.). Air Quality Monitoring System. [Google Scholar] [Crossref]

10. Applications. (n.d.). Indoor and Outdoor Air Quality Monitoring. [Google Scholar] [Crossref]

11. IOT Integration. (n.d.). Cloud Platforms for Real-time Monitoring. [Google Scholar] [Crossref]

12. Multiple Sensor Integration. (n.d.). Comprehensive Air Quality Monitoring. [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles

© 2026 IJLTEMAS · RSIS International. All rights reserved. ISSN 2278-2540.