PLC and Automation for Wind Energy Systems: A Comprehensive Framework for Efficient Wind Power Integration

Article Sidebar

Main Article Content

Shubha Baravani
ARUNA J NAZARETH

Abstract: One essential component of contemporary renewable energy solutions is wind energy systems. To maximize performance and reduce downtime, these systems must be efficiently controlled and monitored in real time. With an emphasis on control architectures, fault diagnostics, grid synchronization, and SCADA integration, this paper investigates the use of PLCs and automation technologies in wind energy systems. The suggested framework is extremely relevant for the deployment of industrial wind farms since it improves turbine efficiency, guarantees safe operation, and facilitates grid-friendly power delivery.

PLC and Automation for Wind Energy Systems: A Comprehensive Framework for Efficient Wind Power Integration. (2025). International Journal of Latest Technology in Engineering Management & Applied Science, 14(6), 121-129. https://doi.org/10.51583/IJLTEMAS.2025.140600015 (Original work published 2025)

Downloads

References

Ackermann, T., & Söder, L. (2000). Wind energy technology and current status: A review. Renewable and Sustainable Energy Reviews, 4(4), 315–374. https://doi.org/10.1016/S1364-0321(00)00004-6

Bevrani, H., Ghosh, A., & Ledwich, G. (2010). Renewable energy sources and frequency regulation: Survey and new perspectives. IET Renewable Power Generation, 4(5), 438–457. https://doi.org/10.1049/iet-rpg.2009.0049

Blaabjerg, F., Yang, Y., Yang, D., & Wang, X. (2017). Distributed power-generation systems and protection. Proceedings of the IEEE, 105(7), 1311–1331. https://doi.org/10.1109/JPROC.2017.2693858

Bhowmik, S., Kramer, B., & White, G. (1999). Dynamic modeling and performance of a grid-connected doubly-fed induction generator. IEEE Transactions on Energy Conversion, 12(1), 69–74. https://doi.org/10.1109/60.558001

Carrasco, J. M., et al. (2006). Power-electronic systems for the grid integration of renewable energy sources: A survey. IEEE Transactions on Industrial Electronics, 53(4), 1002–1016. https://doi.org/10.1109/TIE.2006.878356

Chauhan, Y. K., & Saini, R. P. (2014). A review on integrated renewable energy system based power generation for stand-alone applications. Renewable and Sustainable Energy Reviews, 38, 99–120. https://doi.org/10.1016/j.rser.2014.05.079

Chen, Z., Guerrero, J. M., & Blaabjerg, F. (2009). A review of the state of the art of power electronics for wind turbines. IEEE Transactions on Power Electronics, 24(8), 1859–1875. https://doi.org/10.1109/TPEL.2009.2017082

Cruz, S., & Silva, M. (2009). PLC-based SCADA system for wind energy plants. Renewable Energy and Power Quality Journal, 7, 455–460. https://doi.org/10.24084/repqj07.348

El Harrouz, K., et al. (2022). Artificial intelligence-based controllers for wind turbines: A review. Renewable and Sustainable Energy Reviews, 158, 112108. https://doi.org/10.1016/j.rser.2022.112108

Gao, H., et al. (2020). Wind turbine pitch control using PLC and SCADA system. International Journal of Renewable Energy Research, 10(2), 525–534.

Gonzalez-Longatt, F., & Wall, P. (2008). Effect of pitch control on the power production of a wind farm. Proceedings of the 2008 International Conference on Renewable Energies and Power Quality, 6, 182–187.

Ghosh, S., et al. (2020). Cybersecurity issues in SCADA and PLC systems for wind turbines. IEEE Transactions on Industrial Informatics, 16(5), 3362–3370. https://doi.org/10.1109/TII.2019.2945460

Hansen, A. D., & Michalke, G. (2007). Fault-ride-through capability of DFIG wind turbines. Renewable Energy, 32(9), 1594–1610. https://doi.org/10.1016/j.renene.2006.07.002

Heier, S. (2014). Grid integration of wind energy: Onshore and offshore conversion systems (3rd ed.). Wiley.

Kabalci, Y. (2016). Design and implementation of a renewable energy monitoring system. International Journal of Electrical Power & Energy Systems, 74, 387–395. https://doi.org/10.1016/j.ijepes.2015.08.022

Kishore, R. A., et al. (2018). Condition monitoring techniques for wind turbine gearbox: A review. Renewable and Sustainable Energy Reviews, 82, 402–415. https://doi.org/10.1016/j.rser.2017.09.077

Mohamed, M. Y., & Eltamaly, A. M. (2021). PLC-based control of wind energy conversion system in smart grid. Journal of Electrical Engineering & Technology, 16(2), 903–915. https://doi.org/10.1007/s42835-021-00643-y

Ouammi, A., et al. (2014). SCADA system for performance monitoring and remote control of wind farms. Energy Procedia, 57, 681–690. https://doi.org/10.1016/j.egypro.2014.10.225

Sathyajith, M. (2006). Wind energy: Fundamentals, resource analysis and economics. Springer. https://doi.org/10.1007/978-3-540-30906-3

Wang, H., et al. (2019). A fault-tolerant control strategy for wind turbines based on real-time sensor diagnosis. IEEE Transactions on Industrial Electronics, 66(10), 7883–7891. https://doi.org/10.1109/TIE.2018.2889562

Li, X., Wang, H., & Zhao, Y. (2023). Predictive control strategies for wind turbines under variable wind conditions. Renewable Energy, 207, 1158–1172. https://doi.org/10.1016/j.renene.2023.05.049

Kumar, A., & Singh, M. (2022). SCADA-integrated automation for wind energy systems: A review of recent developments and cybersecurity issues. International Journal of Renewable Energy Research, 12(4), 2145–2156.

Abdelrahman, M., Elkazaz, M., & Sumner, M. (2021). Real-time HIL simulation of grid-tied wind energy conversion systems using OPAL-RT. Electric Power Systems Research, 197, 107314. https://doi.org/10.1016/j.epsr.2021.107314

Banerjee, T., & Roy, S. (2023). AI-enhanced PLC programming for fault-tolerant wind turbine control: A hybrid approach. Journal of Intelligent & Robotic Systems, 110(2), 215–231. https://doi.org/10.1007/s10846-023-01786-7

Liu, Y., & Zhang, Q. (2024). Cybersecurity strategies for SCADA systems in distributed wind farms: A resilience-based approach. IEEE Transactions on Smart Grid, 15(1), 440–450. https://doi.org/10.1109/TSG.2023.3278831

Chen, D., & Alsaif, A. (2022). PLC-based control of a DFIG wind turbine with MPPT algorithm implementation. Energy Reports, 8, 926–935. https://doi.org/10.1016/j.egyr.2022.03.078

Singh, R., & Gupta, A. (2023). Integration of Soft-PLCs with MATLAB/Simulink for smart grid validation: A case study on wind turbines. Energy Conversion and Management: X, 19, 100423. https://doi.org/10.1016/j.ecmx.2023.100423

Zhang, K., & Chen, J. (2021). Data-driven fault detection in wind turbine SCADA systems using ensemble learning. Renewable and Sustainable Energy Reviews, 145, 111122. https://doi.org/10.1016/j.rser.2021.111122

Dey, B., & Saha, H. (2022). Real-time monitoring and control of wind turbines using OPC UA and MQTT protocols. International Journal of Industrial Electronics and Drives, 8(2), 89–96.

Rahman, M. S., & Khan, R. (2024). HIL validation of intelligent pitch control in wind turbines using LabVIEW and NI cRIO. Renewable Energy Focus, 48, 25–34. https://doi.org/10.1016/j.ref.2023.11.004

Article Details

How to Cite

PLC and Automation for Wind Energy Systems: A Comprehensive Framework for Efficient Wind Power Integration. (2025). International Journal of Latest Technology in Engineering Management & Applied Science, 14(6), 121-129. https://doi.org/10.51583/IJLTEMAS.2025.140600015 (Original work published 2025)