00
Days
00
Hrs
00
Min
00
Sec
Submit Your Paper

Systematic Review on Improving Performance of a Single-Spool Gas Turbine System Using Combustion Chamber Direct Water Injection

Authors

Azubuike John Chuku

Department of Marine & Offshore Engineering, Faculty of Engineering, Rivers State University, Port-Harourt (NG)

David Abraham Moses

NNPC/Renaisance JV Centre of Excellence in Marine & Offshore Engineering, Rivers State University, Port-Harcourt (NG)

Article Information

DOI: 10.51583/IJLTEMAS.2026.150600068

Subject Category: Systematic Review

Volume/Issue: 15/6 | Page No: 973-990

Publication Timeline

Submitted: 2026-07-06

Published: 2026-07-06

Abstract

This study synthesizes prior research on performance enhancement of single-spool gas turbine systems through direct water injection in the combustion chamber. The review establishes that water injection effectively reduces nitrogen oxides (NOx) emissions by suppressing peak flame temperatures and modifying combustion kinetics. Numerical and experimental investigations indicate that increasing water-to-fuel ratios improves combustion stability, augments mass flow rate, and enhances power output, albeit with a corresponding rise in specific fuel consumption. Comparative assessment of alternative optimization strategies, including regeneration, combined cycles, and inlet air cooling, reveals inherent trade-offs between efficiency gains, environmental performance, and operational constraints. Despite extensive studies, a critical gap remains in defining optimal injection parameters under varying operating conditions. This work therefore proposes a simulation-based framework for optimizing water injection in a 135 MW single-spool gas turbine, targeting improved thermal efficiency, reduced emissions, and enhanced overall performance.

Keywords

Gas turbine; Single spool; Combustion chamber; Direct water injection, etc

Downloads

References

1. Agbadede, R., & Allison, I. (2023). Effect of water injection into aero-derivative gas turbine combustors on NOx reduction. European Journal of Engineering, 5(2), 1–7. https://ej-eng.org/index.php/ejeng/article/view/2180 [Google Scholar] [Crossref]

2. Aungier, R. H. (2021). Gas turbine performance: Engineering method and evaluation (2nd ed.). American Society of Mechanical Engineers Press. [Google Scholar] [Crossref]

3. Boyce, M. P. (2012). Gas turbine engineering handbook (4th ed.). Butterworth-Heinemann. [Google Scholar] [Crossref]

4. Boyce, M. P. (2021). Gas turbine engineering handbook (5th ed.). Butterworth-Heinemann. [Google Scholar] [Crossref]

5. Bunker, R. S. (2006). A review of shaped hole turbine film-cooling technology. Journal of Heat Transfer, 127(4), 441–453. [Google Scholar] [Crossref]

6. Cengel, Y. A., & Boles, M. A. (2015). Thermodynamics: An engineering approach (8th ed.). McGraw-Hill Education. [Google Scholar] [Crossref]

7. Cohen, H., Rogers, G. F. C., & Saravanamuttoo, H. I. H. (1996). Gas turbine theory (5th ed.). Pearson Education. [Google Scholar] [Crossref]

8. Cohen, H., Rogers, G. F. C., & Saravanamuttoo, H. I. H. (2017). Gas turbine theory (7th ed.). Pearson Education. [Google Scholar] [Crossref]

9. Chuku, A. J., & Dilosi, A.T., (2026). The Optimization of a Trimaran Firefighting Vessel for the Gulf of Guinea. Quantum Journal of Engineering, Science and Technology. 7(1): 12-39. eISSN: 2716-6341. https://doi.org/10.55197/qjoest.v7i1.279 [Google Scholar] [Crossref]

10. Dayyabu, G. K., Zheng, Q., Hai, Z., & Lanxin, S. (2018). Effects of water droplets on the numerical simulation of a complete gas turbine. International Journal of Thermodynamics, 21(1), 7–14. https://doi.org/10.5541/ijot.308766 [Google Scholar] [Crossref]

11. Ebigenibo, G., & Nweke, G. (2020). Off-design Performance Analysis of Gas Turbines. Global Journal of Engineering and Technology Advances, 5(1), 46–54. https://gjeta.com/sites/default/files/GJETA-2020-0046.pdf [Google Scholar] [Crossref]

12. Federal Aviation Administration. (2018). Aviation maintenance technician handbook–Power plant (Vol. 1) (FAA-H-8083-32A). U.S. Department of Transportation. https://www.faa.gov [Google Scholar] [Crossref]

13. Galdo, L. I. M., Castro-Santos, L., & Vidal, R. G. C. (2020). Numerical analysis of NOx reduction using ammonia injection and comparison with water injection. Journal of Marine Science and Engineering, 8(2), 109: 1–14. https://doi.org/10.3390/jmse8020109 [Google Scholar] [Crossref]

14. Hanna, M., Mekhail, T., Dahab, O., Esmail, M., & Abdel-Rahman, A. (2016). Experimental and numerical investigation of the solar chimney power plant’s turbine. Open Journal of Fluid Dynamics, 6, 332–342. https://doi.org/10.4236/ojfd.2016.64025 [Google Scholar] [Crossref]

15. Horlock, J. H. (2003). Advanced gas turbine cycles. Pergamon. [Google Scholar] [Crossref]

16. Ibrahim, T. K., Rahman, M. M., & Ahmed, N. A. (2011). Improvement of gas turbine performance-based on inlet air cooling systems: A technical review. International Journal of Physical Sciences, 6(4), 620–627. [Google Scholar] [Crossref]

17. Ighodaro, O. O., & Egbon, O. C. (2021). Comparative performance assessment of different gas turbine configurations: A study of a local power station in Nigeria. Nigerian Journal of Engineering, 28(2). [Google Scholar] [Crossref]

18. Igoma, E., Lebele-Alawa, B. T., & Sodiki, J. I. (2016). Evaluation of the influence of ambient temperature on the performance of the Trans-Amadi gas turbine plant. Journal of Power and Energy Engineering, 4, 19–31. https://doi.org/10.4236/jpee.2016.411002 [Google Scholar] [Crossref]

19. Kurz, R., & Brun, K. (2021). Gas turbine performance: Fundamentals and applications. In Proceedings of the 50th Turbomachinery Symposium, 1–10. https://doi.org/10.21423/R1X97B [Google Scholar] [Crossref]

20. Lebele-Alawa, B. T., & Le-ol, A. K. (2015). Improved design of a 25 MW gas turbine plant using combined cycle application. Journal of Power and Energy Engineering, 3, 1–14. https://doi.org/10.4236/jpee.2015.38001 [Google Scholar] [Crossref]

21. Lefebvre, A. H., & Ballal, D. R. (2010). Gas turbine combustion: Alternative fuels and emissions (3rd ed.). CRC Press. [Google Scholar] [Crossref]

22. Nada, T. (2014). Performance characterization of different configurations of gas turbine engines. Propulsion and Power Research, 3(3), 121–132. https://doi.org/10.1016/j.jppr.2014.07.005 [Google Scholar] [Crossref]

23. Nkoi, B., Pericles, P., & Theorklis, N. (2013). Performance assessment of simple and modified cycle turboshaft gas turbine. Propulsion and Power Research, 2, 96–106. https://doi.org/10.1016/j.jppr.2013.04.009 [Google Scholar] [Crossref]

24. Ogbonnaya, A. E. (2011). Gas turbine performance optimization using compressor online water washing technique. Energy and Power Engineering, 3, 500–507. https://doi.org/10.4236/eng.2011.35058 [Google Scholar] [Crossref]

25. Omar, H., Kamel, A., & Alsanousi, M. (2017). Performance of regenerative gas turbine power plant. Energy and Power Engineering, 9, 136–146. https://doi.org/10.4236/epe.2017.92011 [Google Scholar] [Crossref]

26. Rao, S., & Parulekar, B. B. (2007). Energy technology: Non-conventional, renewable and conventional. Khanna Publishers. [Google Scholar] [Crossref]

27. Reale, F., & Sannino, R. (2021). Water and steam injection in micro gas turbine supplied by hydrogen enriched fuel: Numerical investigation and performance analysis. International Journal of Hydrogen Energy, 46(47), 24366–24381. https://doi.org/10.1016/j.ijhydene.2021.04.169 [Google Scholar] [Crossref]

28. Saravanamuttoo, H. I. H., Rogers, G. F. C., Cohen, H., & Straznicky, P. V. (2009). Gas turbine theory (6th ed.). Pearson Prentice Hall. [Google Scholar] [Crossref]

29. Saturday, E. G., & Nweke, C. (2020). Off-design performance analysis of gas turbines. Global Journal of Engineering and Technology Advances, 4(2), 1–10. https://doi.org/10.30574/gjeta.2020.4.2.0046 [Google Scholar] [Crossref]

30. Sharafoddini, R., Habibi, M., & Pirmohammadi, M. (2020). Numerical study of water vapor injection in the combustion chamber to reduce gas turbine fuel consumption. Journal of Applied Fluid Mechanics, 13(3), 1047–1054. https://www.jafmonline.net/article_966_f34143c1d9e190b859e91ba37a72075d.pdf [Google Scholar] [Crossref]

31. Shinwari, S. (2023). Investigation of fuel and water injection in gas turbine combustion (Master’s thesis, Linköping University). DiVA Portal. https://www.diva-portal.org/smash/get/diva2:1793877/FULLTEXT01.pdf [Google Scholar] [Crossref]

32. Soares, C. (2015). Gas turbines: A handbook of air, land and sea applications (2nd ed.). Butterworth-Heinemann. [Google Scholar] [Crossref]

33. Xue, R., Hu, C., Nikolaidis, T., & Pilidis, P. (2015). Effects of steam addition on the flow field and NOx emissions for Jet-A aircraft combustor. International Journal of Turbo and Jet Engines, 33(4), 381–394. [Google Scholar] [Crossref]

34. Zahid, S. S. (2022). Impact of water injection on emissions of nitrogen oxides from aircraft engines (Master’s thesis, Massachusetts Institute of Technology). MIT DSpace. https://dspace.mit.edu/handle/1721.1/144573 [Google Scholar] [Crossref]

Metrics

Views & Downloads

Similar Articles

© 2026 IJLTEMAS · RSIS International. All rights reserved. ISSN 2278-2540.