Influence of Cerium (Ce) Doping on the Optical Properties of Silver Telluride (Ag2Te) Thin Films Deposited by Electrodeposition Method.
Article Sidebar
Main Article Content
In this investigation, Silver telluride (Ag2Te) thin films have been successfully deposited onto FTO glass substrate using electro deposition method to investigate the influence of Ce doping on optical properties of Ag2Te films. Silver trioxonitrate (V) and tellurium (iv) oxide were the precursors used for silver and tellurium ions. Depositions of films made from cerium-doped silver telluride were conducted at room temperature. The percentages concentration of cerium dopant used in this investigation are 2.5%, 5.0%, 7.5% and10.0%. The optical properties of the thin films were characterized using Uv-Vis spectrometry. Absorbance results confirm that increasing Ce concentration significantly increases the absorbance of Ag2T films across the UV, VIS, and NIR regions. The 10.0% Ce-doped sample demonstrates the highest absorbance across all regions, with values of 43.36% at 365 nm, 42.68% at 400 nm, 34.00% at 700 nm, and 35.16% at 1100 nm, indicating the strong influence of cerium in enhancing light absorption. This trend reflects that as Ce concentration increases, absorbance improves significantly in all spectral regions, suggesting that Ce doping introduces additional localized states that facilitate electronic transitions, thereby enhancing the films' optical properties. The transmittance of Ag2Te and Ce-doped Ag2Te films decreases notably with increasing cerium concentration across the UV, VIS, and NIR regions. This decline in transmittance with increasing Ce concentration is consistent with the corresponding increase in absorbance suggesting that Ce doping enhances light absorption, thus reducing the amount of light transmitted through the films. Cerium doping enhances reflectance slightly, particularly in the NIR regions, likely due to increased surface roughness and scattering effects introduced by Ce incorporation. The extinction coefficient (k) of silver telluride and cerium-doped silver telluride films generally increases with wavelength, indicating higher optical absorption at longer wavelengths. Other optical results were also presented.
Downloads
References
Nande, A., Kalyani, N. T., Tiwari, A., & Dhoble, S. J. (2023). Exploring the world of functional materials. In Functional Materials from Carbon, Inorganic, and Organic Sources. Woodhead Publishing Series in Electronic and Optical Materials. Woodhead Publishing, pp. 1–19.
Sousan Gholamrezael, Masoud Salavati Niasari, Davood Ghanbari, & Samira Bagheri. (2016). Hydrothermal preparation of silver telluride nanostructures and photo-catalytic investigation in degradation of toxic dyes. Scientific Reports, 6, Article 20060.
Akhil Sreevalsan, Gunhee Kim, Yifan Yu, & Sujoy Bandyopadhyay. (2025). Ag₂Te quantum dots: Emerging heavy metal-free chalcogenides for near and shortwave infrared photodetectors. ACS Applied Electronic Materials, 7(21), 9623–9642.
Ha Heun Lee, Subin Lee, Geunwoo Hwang, Seungyeon Lee, & Suyeon Cho. (2024). Vapor-liquid-solid synthesis of Ag₂Te using chemical vapor deposition method. APL Materials, 12, 011123.
Nonso Livinus Okoli, Laz Nnadozie Ezenwaka, Ngozi Agatha Okereke, Ifeyinwa Amaka Ezenwa, & Nwode Augustine Nwori. (2022). Investigation of optical, structural, morphological and electrical properties of electrodeposited cobalt doped copper selenide (Cu₁−ₓCoₓSe) thin films. Trends in Sciences, 19(16), 5686.
Laia Ferrer-Argemi, Ziqi Yu, Jiwon Kim, Nosang V. Myung, & Jae-Hong Lim. (2019). Silver content dependent thermal conductivity and thermoelectric properties of electrodeposited antimony telluride thin films. Scientific Reports, 9, Article 9242.
Alaa M. Abd-Elnaiem, A. M. Abdelraheem, M. A. Abdel-Rahim, & Samar Moustafa. (2022). Substituting silver for tellurium in selenium–tellurium thin films for improving the optical characteristics. Journal of Inorganic and Organometallic Polymers and Materials, 32, 2009–2021.
Gupta, S. (2025). High Performance Silver Telluride Thin Films: An Experimental Study. First Edition. Scholarly Publication.
Penglu Yu, Mingxuan Li, Wenqian Lv, Zhilei Liu, & Shangheng Yu. (2025). Iodide ion-assisted silver-telluride-based nanowires: Morphology optimization and efficient doping for improved thermoelectric application. Nano-Micro Small, 21(15).
Gode, F., Kariper, I. A., Guneri, E., & Unlu, S. (2017). Effect of complexing agents on the structural, optical and electrical properties of polycrystalline indium sulphide thin films deposited by chemical bath method. Acta Physica Polonica A, 132(3), 527–530.
Gode, F., & Unlu, S. (2018). Nickel doping effect on the structural and optical properties of indium sulfide thin films by SILAR. Open Chemistry, 16, 757–762.
Chaudhary, P., & Kumar, V. (2019). Preparation of ZnO thin film using sol-gel dip-coating technique and their characterization for optoelectronic applications. World Scientific News, 121, 64–71.
Lokhande, C. D., Sankapal, B. R., Mane, R. S., Pathan, H. M., Muller, M., Giersig, M., & Ganesan, V. (2002). XRD, SEM, AFM, HRTEM, EDAX and RBS studies of chemically deposited Sb₂S₃ and Sb₂Se₃ thin films. Applied Surface Science, 193(1), 1–10.
Ismail, B., Mushtaq, S., & Khan, A. (2014). Enhanced grain growth in the Sn doped Sb₂S₃ thin film absorber materials for solar cell applications. Chalcogenide Letters, 11(1), 37–45.
Augustine, Nnabuchi, Chikwenze, M. N., Anyaegbunam, R. A., F. N. C., Kalu, P. N., Robert, B. J., Nwosu, C. N., Dike, C. O., & Taddy, E. N. (2019). Comparative investigation of some selected properties of Mn₃O₄/PbS and CuO/PbS composites thin films. Materials Research Express, 6(066416), 1–10.
Guneri, E. (2019). The role of Au doping on the structural and optical properties of Cu₂O films. Journal of Nano Research, 58, 49–67.
Suresh Sagadevan, & Isha Das. (2017). Chemical bath deposition (CBD) of zinc selenide (ZnSe) thin films and characterization. Australian Journal of Mechanical Engineering, 15(3), 222–227.
Bekkari, R., Jaber, B., Labrim, H., Quafi, M., Zayyoun, N., & Laahab, L. (2019). Effect of solvents and stabilizer molar ratio on the growth orientation of sol-gel derived ZnO thin films. International Journal of Photoenergy, 2019(3164043), 1–7.
Abouda, A. A., Mukherjeeb, A., Revaprasaduc, N., & Mohamed, A. N. (2019). The effect of Cu-doping on CdS thin films deposited by the spray pyrolysis technique. Journal of Materials Research and Technology, 8(2), 2021–2030.
Tezel, F. M., Ozdemir, O., & Kariper, I. A. (2017). The effects of pH on structural and optical characterization of iron oxide thin films. Surface Review and Letters, 24(4), 1750051, 1–10.
Ongwen, N. O., Oduor, A. O., & Ayieta, E. O. (2019). Effect of concentration of reactants on the optical properties of iron-doped cadmium stannate thin films deposited by spray pyrolysis. American Journal of Materials Science, 9(1), 1–7.
Sreedev, P., Rakhesh, V., & Roshina, N. S. (2018). Optical characterization of ZnO thin films prepared by chemical bath deposition method. IOP Conference Series: Materials Science and Engineering, 377, 012086, 1–7.
Guneri, E., & Kariper, A. (2018). Characterization of high quality chalcogenide thin films fabricated by chemical bath deposition. Electronic Materials Letters, 9(1), 13–17.
Augustine, Nnabuchi, Chikwenze, M. N., Anyaegbunam, R. A., F. N. C., Kalu, P. N., Robert, B. J., Nwosu, C. N., Dike, C. O., & Taddy, E. N. (2019). Comparative investigation of some selected properties of Mn₃O₄/PbS and CuO/PbS composites thin films. Materials Research Express, 6(066416), 1–10.
Kariper, I. A. (2018). A new route to synthesis MnSe thin films by chemical bath method. Materials Research, 21(2), 1–6.
Mushtaq, S., Tahir, S. A., Ashfaq, A., Ahmad, W., & Baig, A. (2022). Effect of ammonia on the structural, morphological and optical properties of nanocrystalline ZnS thin film. Optik, 261, 169088.
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in our journal are licensed under CC-BY 4.0, which permits authors to retain copyright of their work. This license allows for unrestricted use, sharing, and reproduction of the articles, provided that proper credit is given to the original authors and the source.