Optimization of Maintenance Strategies in an Oil and Gas Production Facility to Minimize Maintenance Cost

Abstract: In this study, maintenance strategies in an oil and gas production facility were optimized to minimize maintenance costs. The centrifugal pump system in Port Harcourt Refinery was selected for this study because it significantly impacts on the productivity of the refining plant. The pump system’s failure mode effects and criticality analysis (FMECA) were examined, and an optimized maintenance task was developed for the system. The exponential reliability method was employed to analyse the pump’s failure data to determine the pump systems' failure rate and reliability while reliability centred maintenance (RCM) and linear programming (LP) model were employed to optimize the pump’s maintenance strategies and the pump’s maintenance labour force respectively.  Broad-based results of the optimized maintenance strategies consisted of on-condition-directed (CD) maintenance, preventive maintenance (PreM), and Proactive maintenance (ProM) strategies to be carried out monthly. The optimized maintenance labour force result revealed that approximately three engineers and two technicians should be employed for the pump’s maintenance task with a minimum of N2, 585, 700 as cost of salaries for the labour force monthly as against the current maintenance labour force requiring fourteen engineers and thirteen technicians monthly. The results showed that the labour cost decreased from N180,000,000 per year to N31,028,400 per year (approximately 82.76% reduction) using the proposed optimized maintenance task compared to the current maintenance plan. Conclusion and recommendation were made that the maintenance optimization technique presented in this work should be adopted by the oil and gas processing and production companies in order to minimize maintenance cost.

Equipment, Pumps, Maintenance, Oil and Gas Industry, Optimization, Processing, Production, Reliability, Refinery, RCM

1. Afefy, I. H. (2010). Reliability-Centered Maintenance Methodology and Application: A Case Study’. Journal of Engineering, 2(12), pp. 863–873. [Google Scholar] [Crossref]

2. Ahasan, U. (2015). An Application of Reliability-Centered Maintenance (RCM) in Lead Oxide Production System - A Case Study. Proceedings from BUET Int’l Conference, Bangladesh, 4(3), 36-57. [Google Scholar] [Crossref]

3. Al-Najjar, B. (2007). The lack of maintenance and not maintenance which cost: A model to describe and quantify the impact of vibration-based maintenance on company’s business. Int. J. Production Economics. 107, 260 – 273 [Google Scholar] [Crossref]

4. Alsyouf (2007). The role of maintenance in improving companies’ productivity and profitability’ . International Journal of Operations & Production Management, 3(7), pp. 501-512. [Google Scholar] [Crossref]

5. Bhangu, N. S., Singh, R., & Pahuja, G. L. (2011). Reliability Centered Maintenance in a Thermal Power Plant: A Case Study, International Journal of Productivity and Quality Management, 7 (2), in press. [Google Scholar] [Crossref]

6. Brah, S. A. & Chong, W. K. (2004). Relationship between total productive maintenance and performance. International Journal of Production Research, 42(12), 2383-2401. [Google Scholar] [Crossref]

7. Deeptesh, S. & Amit, S. (2015). ‘Study of Centrifugal Pump Using Failure Mode Effect and Critical Analysis Based on Fuzzy Cost Estimation’. International Journal of Science and Research, 4(7), pp. 75-82 [Google Scholar] [Crossref]

8. Ethevenin, T. J. E. (2010). ‘Maintenance performance measurement in Oil & Gas Industry’, Retrieved from http://scholarbank.nus.edu.sg/handle/10635/22139 [Google Scholar] [Crossref]

9. Goodfellow, W. J. (2000). ‘Applying Reliability Centered Maintenance (RCM) to Overhead Electric Utility Distribution Systems’. Proceedings of IEEE Conference, Wellington, 23(19), pp.565-566. [Google Scholar] [Crossref]

10. Igor, B. (2004). Reliability Theory and Practice. Courier Dover Publication, Minneola, New York. [Google Scholar] [Crossref]

11. Ilogamhc, I. &Emmanuel, F. (2014). Reliability Analysis of Crude Oil Pumps: A Case Study, M.Eng Thesis, Department of Mechanical Engineering, University of Port Harcourt, Choba, Rivers state. [Google Scholar] [Crossref]

12. Itthipol, I. N., Rungreunganun, V., & Talabgaew, S. (2017). Reliability Analysis for Refinery Plants. KMUTNB Int’l .J Appl. Sci. Technol, 10(1), 61–70. [Google Scholar] [Crossref]

13. Khathutshelo, M. & Brian, T. S. (2018). The impact of plant maintenance on quality productivity in Gauteng breweries. International Journal of Operations & Production Management, 1(7), 1224-1232. [Google Scholar] [Crossref]

14. Misikir, T. (2004). Productivity Improvement in Ethiopian leather industry though efficient maintenance management. Department of Mechanical Engineering, Addis Ababa. [Google Scholar] [Crossref]

15. Murtjhy., D. N. P., Atcen., A., & Eclleston, J. A. (2002). Strategic maintenance management. Journal of quality in Maintenance Engineering, 8, (4) 287-305. [Google Scholar] [Crossref]

16. Port Harcourt Refining Company (PHRC) Limited (2021). ‘Port Harcourt Refining Company Limited: Establishment and Products’. Retreived from http://www.nnpcgroup.com/Port-Harcourt-Refining-Company-Limited-Directory / 17th December 2021. [Google Scholar] [Crossref]

17. Samuel, O., Felix, I., Oluseyi, A., Enesi, S., Abraham, A., Obafemi, O., & Stephen, A. A. (2018). A Reliability-Centered Maintenance Study for an Individual Section-Forming Machine. Int’l Journal of Mechanical Engineering and Technology, 5(1), 26-32. [Google Scholar] [Crossref]

18. Zhu, H., Pei, J., Wang, S.,& Huang, X. (2019). Reliability Analysis of Centrifugal Pump Based on Small Scale Sample Data. International Journal of Performability Engineering, 9(4), 423-432. [Google Scholar] [Crossref]

19. Zineb, A., Latifa, E., Jamal, F., Abdeslam, L., &Haj, E. M. (2017). Improving Efficiency of a Production Line by using Overall Equipment Effectiveness: A Case Study. International Journal of Production Research, 4(2), 33-40. [Google Scholar] [Crossref]

• Cyberverse: A Game-Based Learning Application for Cyber Security
• Design and Development of a Low Cost Smart Electronic School Bell
• Assessing the Effectiveness of TVET Training in Enhancing Youth Employability: A Case Study of Kisumu County, Kenya
• Social Penetration Analysis in Self-Disclosure of Online Loan Application Users to Their Partners
• Cost and Return Analysis of Tomato Cultivation in Three Different Districts of Bangladesh