Erosion-Corrosion: An Up-To-Date Review of Origin, Impacts, Affecting Factors, Occurrence Areas, Experimental Measuring Devices, and Research Advances

Abstract: An up-to-date review of erosion-corrosion from various literary sources, covering its origin, impacts, affecting factors, occurrence areas, experimental measuring devices, and research advances, is reported. From the review, erosion-corrosion is a mechanically caused action by impinging fluid, usually liquid, slurry abrasion, suspended particles in fast-flowing fluids, bubbles, droplets, cavitations, etc., under complex synergistic effects of the natural electrochemical corrosion. It is affected by many factors that still need to be fully understood, so it is very challenging to accurately find its rates for controlling it. It is a very costly problem that is common in power plants, water, oil, gas, metallurgy, mining, and other industrial sectors that utilize mechanical equipment as well as structural components in hydraulic environments. Its effects are predominant in petroleum pipelines and heat exchange industries, as well as marine equipment or structures. Its rates, time scale, and capacity to degenerate material components to failure are much more alarming than most other corrosion types. This corrosion type is highly detestable, so much attention has been drawn to it, as attested by many research outputs on it to date, with a pressing need for ways, including emerging technologies, of minimizing its impacts. Forty-six of the research outputs have been recapitulated and presented, and they focus on developing and/or testing alternative material components, coatings, measuring devices, and application of artificial intelligence, for better erosion-corrosion resistances or rate measurements and control under various fluid conditions. The paper provides integrated, up-to-date information on erosion-corrosion for easy accessibility for the needful basic knowledge for research progress towards reducing its impacts.

Erosion-corrosion, Affecting factors, Rates determination, Measuring devices, Challenges, Emerging technologies, Research advances, Up-to-date information

1. Guma, T.N., Kalu, N.M., Shettima, K.D. and Agbo, S.I. (2023). Corrosivity Extents of Ogogoro (locally brewed gin) to aluminum and steel metals and human health implications, Indian Journal of Engineering, Discovery Scientific Society, 20, e11ije1011, Doi: https://doi.org/10.54905/disssi/v20i53/e11ije1011 [Google Scholar] [Crossref]

2. Guma, T.N., Atiku, S. A., & Abdullahi, A. A. (2017) Corrosion Management and Control: Entrepreneurial Opportunities and Challenges in Nigeria, International Journal of Engineering Research and Application, 7(10), 14-23. [Google Scholar] [Crossref]

3. Azhari, A., Schindler, C., Nkoumbou, J. and Kerscher, E. (2014). Surface Erosion of Carbon Steel 1045 During Waterjet Peening, Journal of Materials Engineering and Performance, 23, 1870-1880. DOI: 10.1007/s11665-014-0932-9. [Google Scholar] [Crossref]

4. Boran Tian. Mechanistic Understanding and Effective Prevention of Erosion-corrosion of Hydro-transport Pipes in Oil Sand Slurry. M.Sc. Thesis, Department of Mechanical and Manufacturing Engineering, University of Calgary, Alberta, Canada, September, 2007. [Google Scholar] [Crossref]

5. Midany, E.I., Samad, T.T., Menam, A.A.F.A., and Saleh, Y.S.A. (2016). Effect of Particles type, Velocity, and Impact Angle on Slurry Erosion of Stainless Steel Using Simple Test Rig, Journal of Al Azhar University Engineering Sector, 11(39), 523-535. [Google Scholar] [Crossref]

6. Imran, M.M.H., Imran, A.A., Ali, M., Jamaludin, S. and Ayob, A.F.M. The application of artificial intelligence in corrosion monitoring, Journal of Engineering and Science Research 7(1), 17-25, 2023 [Google Scholar] [Crossref]

7. Li, P., Zhao, Y. and Wang, L. (2019). Research on Erosion-Corrosion Rate of 304 Stainless Steel in Acidic Slurry via Experimental Design Method, Materials, 12, 2330. https://doi.org/10.3390/ma12142330] [Google Scholar] [Crossref]

8. Rao, P and Mulky. L. (2023). Erosion-Corrosion of Materials in Industrial Equipment: A Review, Electrochemical Science Advances, 10(16), 1-13. https://doi.org/10.1002/celc.202300152 [Google Scholar] [Crossref]

9. Javaheri, V., Portera, D. and Kuokkala, V.T. 2018). Slurry erosion of steel-Review of tests, mechanisms and materials, Wear, Vols. 408-409, 248–273, https://doi.org/10.1016/j.wear.2018.05.010 [Google Scholar] [Crossref]

10. Zadeh, S. A. (2023). Erosion-corrosion. Intech Open. Doi: 10.5772/intechopen.109106 [Google Scholar] [Crossref]

11. Xu, Y., Liu, L., Zhou, Q., Wang, X., Tan, M.Y. and Huang, Y. (2020). An Overview of Major Experimental Methods and Apparatus for Measuring and Investigating Erosion-Corrosion of Ferrous-Based Steels, Metals, 10(2), 180, 1-32, https://doi.org/10.3390/met10020180 [Google Scholar] [Crossref]

12. Zhao, J., Ma, A., Ji, X., Jiang, J. and Bao Y. (2018) Slurry Erosion Behavior of AlxCoCrFeNiTi0.5 High-Entropy Alloy Coatings Fabricated by Laser Cladding. Metals, 8(2), 126. https://doi.org/10.3390/met8020126] [Google Scholar] [Crossref]

13. Xu, Y.Z., Liu, L., Xu, C., Wang, X., Tan, M.Y. and Huang, Y. (2020). Electrochemical characteristics of the dynamic progression of erosion-corrosion under different flow conditions and their effects on corrosion rate calculation, Journal of Solid State Electrochemistry, 24(2), DOI:10.1007/s10008-020-04795-9. [Google Scholar] [Crossref]

14. Xu, Y., Liu, L., Zhou, Q., Wang, X., Tan, M.Y. and Huang, Y. (2020). An Overview of Major Experimental Methods and Apparatus for Measuring and Investigating Erosion-Corrosion of Ferrous-Based Steels, Metals, 10, 180; 1-32, doi:10.3390/met10020180 [Google Scholar] [Crossref]

15. Buszko, M.H. and Krella, A.K. (2017). Slurry Erosion-Design of test Devices, Advances in Materials Science, Vol. 17, No. 2 (52), 1-17, DOI: 10.1515/adms-2017-0007 [Google Scholar] [Crossref]

16. Prabhu, S. Erosion Corrosion: Coatings and Other Preventive Measures, Published: February 22, 2018, by CORROSIONPEDIA. Available online at:https://www.corrosionpedia.com/2/1868/corrosion-prevention/metallic-and-ceramic-coatings/erosion-corrosion-coatings-and-other-preventive-measures. Accessed, 23, December, 2024. [Google Scholar] [Crossref]

17. Roshan, Kuruvila. S., Thirumalai, K. M., Adam, K. and Uthayakumar, M. A brief review on the erosion-corrosion behavior of engineering materials, De Gruyter, Corrosion Review, 2018, 1-12, https://doi.org/10.1515/corrrev-2018-0022 [Google Scholar] [Crossref]

18. Kharaji, S. (2023). Self-Healing Coatings. IntechOpen. Doi: 10.5772/intechopen.109500 [Google Scholar] [Crossref]

19. Aljibori, H.S., Alamiery, A. and Kadhum A.A.H. Advances in corrosion protection coatings:A comprehensive review, International Journal of Corrosion Scale Inhibition, 12(4), 2023,1476-1520, Doi: 10.17675/2305-6894-2023-12-4-6 [Google Scholar] [Crossref]

20. Keshavamurthy, R., Be, N. and Sekhar, N.S. Chapter 10, Thermal Spray Coatings for Erosion-Corrosion Protection, Advances in Chemical and Materials Engineering Books Series, pp. 246-267 [Google Scholar] [Crossref]

21. Selvam Kevin, P., Tiwari, A., Seman, S., Beer Mohamed, S. A. and Jayaganthan, R. (2020). Erosion-Corrosion Protection Due to Cr3C2-NiCr Cermet Coating on Stainless Steel. Coatings, 10(11), 1042. https://doi.org/10.3390/coatings10111042 [Google Scholar] [Crossref]

22. Bisht, A.K., Vaishya, R.O., Walia, R.S. and Singh, G. Nitrides ceramic coatings for tribological applications: A journey from binary to high-entropy compositions, Ceramics International, 50(6), 2024, 8553-8585, https://doi.org/10.1016/j.ceramint.2023.12.245. [Google Scholar] [Crossref]

23. Kapali, A., Chitrakar, S., Shrestha, O., Neopane , H.P. and Thapa, B.S. (2019). A Review on Experimental Study of Sediment Erosion in Hydraulic Turbines at Laboratory Conditions, IOP Conference Series: Journal of Physics: Conf. Series 1266 (2019) 012016, IOP Publishing Doi:10.1088/1742-6596/1266/1/012016 [Google Scholar] [Crossref]

24. Saleh, B., Abouel-Kasem, A. and Ahmed, S.M. Effect of Surface Properties Modification on Slurry Erosion–Corrosion Resistance of AISI 5117 Steel, Journal of Tribology, 137(3), 2015 [Google Scholar] [Crossref]

25. Gupta, S., Khandelwal, A., Ghose, A. and Chakrabarty, I. (2016). Slurry Erosion Behavior of Destabilized and Deep Cryogenically Treated Cr-Mn-Cu White Cast Irons, Tribology in Industry, 486, 486-495. [Google Scholar] [Crossref]

26. Xu, Y., Zhang, Q., Chen, H. and Huang, Y. (2023). Understanding the interaction between erosion and corrosion of pipeline steel in acid solution of different pH, Journal of Materials Research and Technology, Vol. 25, 6550-6566, [Google Scholar] [Crossref]

27. Aldahash, S.A., Abdelaal, O. and Abdelrhman, Y. (2020). Slurry Erosion–Corrosion Characteristics of As-Built Ti-6Al-4V Manufactured by Selective Laser Melting, Materials, 13(18), 3967. https://doi.org/10.3390/ma13183967 [Google Scholar] [Crossref]

28. Liu, K., Jiang, W., Chen, W., Liu, L., Xu, Y. Z and Huang, Y.S. (2022). Probing the Dynamic Progression of Erosion–Corrosion of X65 Pipeline Steel Using the Electrical Resistance Method in Conjunction with Galvanostatic Polarization, Lubricants, 10(12), 345. 10.3390/lubricants10120345. [Google Scholar] [Crossref]

29. Salehikahrizsangi, P., Raeissi, P., Karimzadeh, F., Calabrese, L. and Proverbi, E. (2021). Effects of Surface Morphology on Erosion–Corrosion and Corrosion Resistance of Highly Hydrophobic Nickel-Tungsten Electrodeposited Film, Coatings, 11, 1084, 1-13, 10.3390/coatings11091084 [Google Scholar] [Crossref]

30. Daniel Efird, K. Flow Corrosion Effects Using Jet Impingement Corrosion Testing. Stress Engineering Service, Inc. Available online at: https://www.stress.com/flow-corrosion-effects-jet-impingement/. Accessed 14/09/2020. [Google Scholar] [Crossref]

31. Selvarajan, R. and Balasubramanian, V. (2018). Corrosion performance of friction surfaced nickel aluminum bronze (NAB) alloy under erosion corrosion and salt fog environment, Corrosion Engineering, Science and Technology, 53, 1-6. DOI: 10.1080/1478422X.2018.1425178. [Google Scholar] [Crossref]

32. Khan, R., Wieczorowski, M., Damjanović, D., Karim, M. R. and Alnaser, I. A. (2023). Erosion-Corrosion Failure Analysis of a Mild Steel Nozzle Pipe in Water-Sand Flow. Materials, 16(22), 7084. https://doi.org/10.3390/ma16227084 [Google Scholar] [Crossref]

33. Laukkanen, A., Lindgren, M., Andersson, T., Pinomaa, T., & Lindroos, M. (2020). Development and validation of coupled erosion-corrosion model for wear resistant steels in environments with varying pH. Tribology International, 151, Article 106534. https://doi.org/10.1016/j.triboint.2020.106534 [Google Scholar] [Crossref]

34. Toor, I.U., Alashwan, Z., Badr, H.M., Ben-Mansour, R. and Shirazi, S.A. (2020). Effect of Jet Impingement Velocity and Angle on CO2 Erosion–Corrosion with and without Sand for API 5L-X65 Carbon Steel. Materials, 13, 2198. [Google Scholar] [Crossref]

35. Sadique, M., Ainane, S., Yap, Y.F., Rostron, P. and Al-Hajri, E. (2017). NaCl Erosion- Corrosion of Mild Steel under Submerged Impingement Jet, World Academy of Science, Engineering and Technology International Journal of Materials and Metallurgical Engineering,11(2), 368-373. [Google Scholar] [Crossref]

36. Abdu, M.T., Khalifa, W. and Abdelrahman, M.S. Investigation of erosion-corrosion failure of API X52 carbon steel pipeline. Sci Rep 13, 20494 (2023). https://doi.org/10.1038/s41598-023-42556-6 [Google Scholar] [Crossref]

37. Khan, R., Ya, H.H., Pao, W. and Khan. A. (2019). Erosion-Corrosion of 30°, 60°, and 90° Carbon Steel Elbows in a Multiphase Flow Containing Sand Particles, Materials, 12(23), 3898, Doi: 10.3390/ma12233898 [Google Scholar] [Crossref]

38. Pasha, A., Ghasem, H.M. and Neshat, J. (2017). Synergistic Erosion–Corrosion Behavior of X-65 Carbon Steel at Various Impingement Angles, Journal of Tribology, 139(1), pp. 1-7, https://doi.org/10.1115/1.4033336 [Google Scholar] [Crossref]

39. Mohammed Nabeel Majeed. Understanding the Erosion-Corrosion Behavior of Generic Types f Stainless Steels in a CO2-Saturated Oilfield Environment, PhD Thesis, University of Leeds, School of Mechanical Engineering, January, 2018 [Google Scholar] [Crossref]

40. Elemuren, R., Evitts, R., Oguocha, I.N.A. et al. Synergistic Erosion-Corrosion Behavior of AISI 2205 Duplex Stainless Steel Elbows in Potash Brine-Sand Slurry and the Associated Microstructural Changes. Journal of Material Engineering and Performance, 29, 7456–7467 (2020). https://doi.org/10.1007/s11665-020-05195-w [Google Scholar] [Crossref]

41. Zheng, X. and Liu, Y. Slurry erosion–corrosion wear behavior in SiC-containing NaOH solutions of Mo2NiB2 cermets prepared by reactive sintering, International Journal of Refractory Metals and Hard Materials, Volume 78, 2019, 193-200, https://doi.org/10.1016/j.ijrmhm.2018.09.017. [Google Scholar] [Crossref]

42. Naz, M.Y., Sulaiman, S.A., Shukrullah, S., Ghaffar, A., Ibrahim, K.A., and AbdEl-Salam, N.M. (2017). Development of erosion-corrosion mechanisms for the study of steel surface behavior in a sand slurry, Measurement, 106(27), 203-210. [Google Scholar] [Crossref]

43. Peat, T., Galloway, A.M., Toumpis, A.I. and Harvey, D. Evaluation of the synergistic erosion-corrosion behavior of HVOF thermal spray coatings, Surface and Coatings Technology, Volume 299, 2016, 37-48, https://doi.org/10.1016/j.surfcoat.2016.04.072. [Google Scholar] [Crossref]

44. Espinoza-Jara, A., Walczak, M., Molina, V. N. A., Jahn, W. and Brevis, W. (2022). Erosion under turbulent flow: a CFD-based simulation of near-wall turbulent impacts with experimental validation, Engineering Applications of Computational Fluid Mechanics. 16, 1526-1545, DOI 10.1080/19942060.2022.2099978. [Google Scholar] [Crossref]

45. Waldi, M., Leksana, A. M. A., Samudra, H.B., Prajitno, D.H., Syuryana, E.P. and Tjahaya, H. (2023). Erosion-corrosion Simulation of Thermally Sprayed WC-based Cermet in Artificial Seawater and Dam Water Environments, Engineering Journal, 27(11), 1-14, DOI:10.4186/ej.2023.27.11.1 [Google Scholar] [Crossref]

46. Zhang, Q., Jiang, W., Wang, Z., Wang, L, Huang, Y. and Xu, Y. (2023). Evaluation of Corrosion and Erosion-Corrosion Behavior of X65 Pipeline Steel in Flowing CO2-Saturated Electrolyte, Corrosion, 79 (6), 587–604. [Google Scholar] [Crossref]

47. Liang, L., Pang, Y., Tang, Y., Zhang, H., Liu, H. and Li, Y. (2019). Combined wear of slurry erosion, cavitation erosion, and corrosion on the simulated ship surface, Advances in Mechanical Engineering, 11(3), 1–14, Doi: 10.1177/1687814019834450 [Google Scholar] [Crossref]

48. Shiva Suthan Rajahram (2010). Erosion-Corrosion Mechanisms of UNS S31603 Stainless Steel. Ph.D. Thesis, Faculty of Engineering, Science and Mathematics, University of Southampton, England, November 2010. [Google Scholar] [Crossref]

49. Sharma, A., Perumal, G., Arora, H. and Grewal, H. (2021). Slurry Erosion–Corrosion Resistance of MoNbTaTiZr High Entropy Alloy, Journal of Bio- and Tribo-Corrosion, 7(3), DOI: 10.1007/s40735-021-00530-7. [Google Scholar] [Crossref]

50. Guma, T.N. and Ishaya, D.D. (2024). Evaluation of Water Jet Impingement Erosion-Corrosion of Mild Steel under Experimental Operating Conditions, Academy Journal of Science and Engineering, 18(2), 101-124. [Google Scholar] [Crossref]

51. Zhao, Y., Zhou, F., Yao, J., Dong, S. and Li, N. (2015). Erosion–corrosion behavior and corrosion resistance of AISI 316 stainless steel in flow jet impingement, Wear, Vols. 328–329, 464-474, https://doi.org/10.1016/j.wear.2015.03.017. [Google Scholar] [Crossref]

52. Liu, J., BaKeDaShi, W., Li, Z., Xu, Y., Ji, W., Zhang, C., Cui, G. and Zhang, R.Y. (2017). Effect of flow velocity on erosion–corrosion of 90-degree horizontal elbow, Wear, Vols. 376–377, Part A, 516-525, https://doi.org/10.1016/j.wear.2016.11.015. [Google Scholar] [Crossref]

53. Wang, W., Hu, J. Yuan, X., Zhou, L., Yu, J., Zhang, Z. and Zhong, X. (2022). Understanding the effect of tensile stress on erosion-corrosion of X70 pipeline steel, Construction and Building Materials, Vol. 342, Part B, 127972, https://doi.org/10.1016/j.conbuildmat.2022.127972. [Google Scholar] [Crossref]

54. Brownlie, F., Hodgkiess, T., Pearson, A. and Galloway. A.M. (2021). A study on the erosion-corrosion behavior of engineering materials used in the geothermal industry, Wear, Vol. 477, 203821, https://doi.org/10.1016/j.wear.2021.203821. [Google Scholar] [Crossref]

55. Owen, J., Ramsey, C., Barker, R. and Neville, A. (2018). Erosion-corrosion interactions of X65 carbon steel in aqueous CO2 environments, Wear, Vols. 414–415, pp. 376-389, https://doi.org/10.1016/j.wear.2018.09.004. [Google Scholar] [Crossref]

56. Kim, Y.J., Kim, S.W., -Kim, H.B., Park, C.N., Choi, Y. and Park, C.J. (2019). Effects of the precipitation of secondary phases on the erosion-corrosion of 25% Cr duplex stainless steel, Corrosion Science, Vol.152, pp. 202-210, https://doi.org/10.1016/j.corsci.2019.03.006. [Google Scholar] [Crossref]

57. Yi, J.Z., Hu, H. X., Wang, Z.B. and Zheng, Y.G. (2018). Comparison of critical flow velocity for erosion-corrosion of six stainless steels in 3.5 wt.% NaCl solution containing 2 wt.% silica sand particles, Wear, Vols. 416-417, pp. 62-71, https://doi.org/10.1016/j.wear.2018.10.006. [Google Scholar] [Crossref]

58. Owen, J., Ducker, E., Huggan, M., Ramsey, C., Neville, A. and Barker, R. (2019). Design of an elbow for integrated gravimetric, electrochemical and acoustic emission measurements in erosion-corrosion pipe flow environments, Wear, Vols. 428-429, pp. 76-84, https://doi.org/10.1016/j.wear.2019.03.010. [Google Scholar] [Crossref]

59. Kuruvila, R., Thirumalai Kumaran, S., Khan, M. & Uthayakumar, M. (2018). A brief review on the erosion-corrosion behavior of engineering materials. Corrosion Reviews, 36(5), 435-447. https://doi.org/10.1515/corrrev-2018-0022 [Google Scholar] [Crossref]

60. Aribo, S., Fakorede, A., Ige, O. and Olubambi, P. (2017). Erosion-corrosion behavior of aluminum alloy 6063 hybrid composite, Wear, Vols. 376–377, Part A, pp. 608-614, https://doi.org/10.1016/j.wear.2017.01.034 [Google Scholar] [Crossref]

61. Karafyllias, G., Galloway, A. and Humphries, E. (2021). Erosion-corrosion assessment in strong acidic conditions for a white cast iron and UNS S31600 stainless steel, Wear, Vols. 484-485, 203665, https://doi.org/10.1016/j.wear.2021.203665. [Google Scholar] [Crossref]

62. Zhao, W., Wang, C., Zhang, T., Yang, M., Han, B., Neville, A. (2016). Effects of laser surface melting on erosion–corrosion of X65 steel in liquid–solid jet impingement conditions, Wear, Vols. 362-363, 39-52, https://doi.org/10.1016/j.wear.2016.05.006. [Google Scholar] [Crossref]

63. Medvedovski, E., Leal Mendoza, G. and Vargas, G. (2021). Influence of Boronizing on Steel Performance under Erosion-Abrasion-Corrosion Conditions Simulating Downhole Oil Production. Corrosion and Materials Degradation, 2(2), 293-324. https://doi.org/10.3390/cmd2020016, [Google Scholar] [Crossref]

64. Peat, T., Galloway, A.M., Toumpis, A.I. and Harvey, D. (2016). Evaluation of the synergistic erosion-corrosion behavior of HVOF thermal spray coatings, Surface and Coatings Technology, Vol. 299,37-48, https://doi.org/10.1016/j.surfcoat.2016.04.072. [Google Scholar] [Crossref]

65. Giourntas, L., Brownlie, F., Hodgkiess, T. and Galloway, A.M. (2021). Influence of metallic matrix on erosion-corrosion behavior of high chromium cast irons under slurry impingement conditions, Wear, 477,203834, https://doi.org/10.1016/j.wear.2021.203834. [Google Scholar] [Crossref]

66. Yi, J., He, S., Wang, Z. et al (2021). Effect of Impact Angle on the Critical Flow Velocity for Erosion–Corrosion of 304 Stainless Steel in Simulated Sand-Containing Sea Water. J. Bio Tribo Corros 7, 99. https://doi.org/10.1007/s40735-021-00538-z [Google Scholar] [Crossref]

67. Brownlie, F., Hodgkiess, T. and Fanicchia, F. (2021). Erosion-corrosion behavior of CoCrFeNiMo0.85 and Al0.5CoCrFeNi complex concentrated alloys produced by laser metal deposition, Surface and Coatings Technology, Vol. 423, 127634, https://doi.org/10.1016/j.surfcoat.2021.127634 [Google Scholar] [Crossref]

68. Imran, M.M.H., Imran, A.A., Ali, M., Jamaludin, S. and Ayob, A.F.M. The application of artificial intelligence in corrosion monitoring, Journal of Engineering and Science Research 7 (1): 17-25, 2023 [Google Scholar] [Crossref]

69. Bohane, P., Gohil, T.B. and Srivastav, A.K. Machine learning-based predictive approach for pitting and uniform corrosion in geothermal energy systems, Electrochimica Acta, Volume 504, 2024, 144884, https://doi.org/10.1016/j.electacta.2024.144884. [Google Scholar] [Crossref]

70. Imran, M.M.H., Jamaludin, S., Ayob,, A.F.M., Ahmad Ali Imran Mohd Ali, A.A.I.M., Sayyid Zainal Abidin Syed Ahmad, S.Z.A.S., Akhbar, M.F.A., Suhrab, M.I.R., et al. Application of Artificial Intelligence in Marine Corrosion Prediction and Detection, Journal of Marine Science and Engineering, 2023, № 2, p. 256, https://doi.org/10.3390/jmse11020256 [Google Scholar] [Crossref]

71. Khalaf, A.H., Xiao, Y., Xu, N., Wu, B., Li, H., Lin, B., Nie, Z. and Tang, J. Emerging AI technologies for corrosion monitoring in oil and gas industry: A comprehensive review, Engineering Failure Analysis, Volume 155, 2024, 107735, https://doi.org/10.1016/j.engfailanal.2023.107735. [Google Scholar] [Crossref]

72. Yan L, Diao Y, Lang Z, Gao K. Corrosion rate prediction and influencing factors evaluation of low-alloy steels in marine atmosphere using machine learning approach. Sci Technol Adv Mater. 2020 Jun 19;21(1):359-370. doi: 10.1080/14686996.2020.1746196. PMID: 32939161; PMCID: PMC7476538 [Google Scholar] [Crossref]

73. Espinoza-Jara, A., Wilk, I., Aguirre, J. and Walczak, M. (2023). An AI-Extended Prediction of Erosion-Corrosion Degradation of API 5L X65 Steel. Lubricants, 11(10), 431. https://doi.org/10.3390/lubricants11100431 [Google Scholar] [Crossref]

74. Chou, J., Ngo, N. and Chong, W.K. The use of artificial intelligence combiners for modeling steel pitting risk and corrosion rate, Engineering Applications of Artificial Intelligence, Volume 65, 2017, Pages 471-483, https://doi.org/10.1016/j.engappai.2016.09.008. [Google Scholar] [Crossref]

• Assess the Dilemma between the Use of Conventional and Unconventional Energy in Nigerian Shallow Water Oil Fields
• Modeling and Simulation of ‘Univariate and Multivariate analytics’ by applying ‘Deep Learning and Machine Learning’ Application of Support Vector Regression, Random Forest, K-Nearest Neighbors, Long Short-Term Memory and Gated Recurrent Units Algorithms f
• The Effects of Integrating Information and Communication Technology (ICT) In Teaching the Atomic Structure in Chemistry among Senior High School Students
• An Assessment of the Impact of Poor Indoor Air Quality on Public Health in Nigerian Urban Environments; Case Study of FCT, Abuja
• Optimizing Building Envelope Design for Cooling Loads Reduction in Abuja