Obtaining a Binary System Based on Styrene–Butadiene–Styrene Polymer using Carbon Nanotubes and Determination of the Flow Index of the Composition Melt.
Authors
Sharif Hajiyev Mahir
Master's Student, Department of Organic Substances and Technology of Macromolecular Compounds, Azerbaijan State Oil and Industry University, Baku, AZ1010, Azerbaijan, 20 Azadliq Avenue (AZ)
Aysun Rzazadə Mubariz
Master's Student, Department of Organic Substances and Technology of Macromolecular Compounds, Azerbaijan State Oil and Industry University, Baku, AZ1010, Azerbaijan, 20 Azadliq Avenue (AZ)
Article Information
DOI: 10.51583/IJLTEMAS.2026.15020000044
Subject Category: Chemistry
Volume/Issue: 15/2 | Page No: 522-527
Publication Timeline
Submitted: 2026-03-09
Published: 2026-03-09
Abstract
This work is devoted to the preparation and investigation of a composite based on styrene–butadiene–styrene (SBS) polymer using carbon nanotubes. Nanocomposites based on styrene–butadiene–styrene polymer (SBS) and carbon nanotubes were prepared by the emulsion mixing method, while the vulcanization process was carried out in accordance with standard test methods used for SBS evaluation.
The incorporation of carbon nanotubes (CNTs) into the rubber compound improved the compatibility of the components, and the resulting nanocomposite exhibited high thermal stability. The nanomaterial enhanced the process ability of SBS rubber–based composites. Compared with rubber reinforced solely with carbon black, the use of nanomaterials led to a 27% increase in stress at 100% permanent elongation. In addition, partial replacement of carbon black resulted in an increase in the elongation at break of the vulcanization from 424.5% to 554.0%.
The mechanical properties of the obtained rubbers demonstrated that they can be regulated by
Keywords
Styrene–butadiene–styrene rubber, carbon black, CNT, modification, vulcanization, rheology.
Downloads
References
1. Alizade Tarlan PHYSICO-MECHANICAL PROPERTIES OF PETROLEUM ROAD BITUMEN MODIFIED ON THE BASIS OF STYRENE-BUTADIENE BUTYL RUBBE, 2024, Innovative scientific research Proceedings of the IX International Scientific and Practical Conference 14-15 March , Pp34-40 DOI: https://doi.org/10.5281/zenodo.10882832 [Google Scholar] [Crossref]
2. G. Barrera Torres, Carlos M. Gutierrez Aguilar, Elizabeth R al. et . Application of Post-Industrial Leather Waste for the Development of Sustainable Rubber Composites Polymers 2025, 17(2), 190; DOI: 10.3390/polym17020190 [Google Scholar] [Crossref]
3. Fariz A. Amirli brahim H. Movlayev Aynur F. Mammadova S TUDY OF THE RHEOLOGY PROPERTIES OF THE MIXTURE OF TERMINAL ETHYLENE-PROPYLENE RUBBER WITH BENZYNAMINE-MODIFIED PHENOL-FORMALDEHYDE OLIGOMER, PPOR,Vol. 26, No. 1, 2025, pp.229-239 https://doi.org/10.62972/1726-4685.2025.1.229 [Google Scholar] [Crossref]
4. brahim H. Movlaye.COMPOSITIONS BASED ON EPOXIDIAN OLIGOMER MODIFIED WITH LOW MOLECULAR BUTADIENE-NITRILE RUBBER.PPOR,Vol. 26, No. 3, 2025, pp.688-696 https://doi.org/10.62972/1726-4685.2025.3.688 [Google Scholar] [Crossref]
5. Gambaro D.SH. Spreading of Astaxanthin and Astragals species on the highland zones of the Nakhichevan autonomous republic // European Academic Research, 2014, İmpact Factor 3,1: p.-4153-4159 / DOI: 10.32388/ZCAXYW.2 [Google Scholar] [Crossref]
6. kerem Seyfi Modification of the used up polymeric materials and investigation thof e properties of the materials obtained. Journal of Medical Pharmaceutical and Allied Sciences, 2022, 11(2), pages 4697–4702 DOI: 10.35940/ijitee.G5721.079920 5..Kerem Shixaliyev. Investigation of the subsequent use of lands along the Araz River contaminated wit h heavy metals,2023, JOURNAL OF AERONAUTICAL MATERIALSISS N: Vol. 43, Issue-01, pp. 102-111,https://www.hkclxb.cn/article/view/2023/102.html [Google Scholar] [Crossref]
7. Kerem Shixaliyev Research New Ways of Processing Polymer Waste that was Formed as a Result of Operation321-335 Novel Perspectives of Geography, Environment and Earth Sciences Vol. 1 Vol. 1, 22 December 2022 , Page 25-35https://doi.org/10.9734/bpi/npgees/v1/17431D [Google Scholar] [Crossref]
8. Kerem Shixaliyev PROPERTIES OF THE COMPOSITION BASED ON MODIFIED POLYETHYLENES , 2023, Eur. Chem. Bull. , 2023; Volume -12 , Special Issue-5 : Page: 242-258 . doi 10.31838/ECB/2023.12.si5.023 [Google Scholar] [Crossref]
9. Kerem Shixaliyev Study of the Properties of the Composition Obtained Based on Mixtures of Polyvinyl Chloride and Ethylene-Propylene Copolymers International ,2023,Journal of Current Science Research and Review ISSN: 2581-8341 Vol 6 No 1 (2023): Volume 06 Issue 01 January ,pp314-318 doi 10.31838/ECB/2023.12.si5.023 [Google Scholar] [Crossref]
10. Kerem Shixaliyev.Investigating Recycling Methods of End-of-Life Car Tires,2023, Journal of Advanced Zoology, Volume 44 Issue S-3 Year 2023 Page 1149:1157 ,DOI: https://doi.org/10.17762/jaz.v44iS-3.1205 [Google Scholar] [Crossref]
11. Kerem Shixaliyev Investigation of the Рroрerties of a Composition Obtained based on Mixtures of Polyvinylchloride and Synthetic Rubber Ethylene Рroрylene Terрoliymer2023,Editorial Board of Journal of Coastal Life Medicine editor special issue eurchembull . Vol. 11: Number 1, 2023 JCLMM 1/11 pp.|2653–2658, https://www.jclmm.com/index.php/journal/article/view/741. [Google Scholar] [Crossref]
Metrics
Views & Downloads
Similar Articles
- Drone-Based Phenotyping and its Utilization in Crop Improvement: A Review
- An IoT-Enabled Smart Healthcare Monitoring System Using Machine Learning for Early Health Risk Prediction
- Strategic Integration of Artificial Intelligence for Achieving Operational Excellence in Container Freight Stations Using Evidence from Chennai, India
- Adoption of OTT platforms: Analyzing User Behavior through the UTAUT2 Model
- Customers’ Buying Behaviour in Relation to Online Food Delivery (Evidence from National Capital Region (NCR) of India)