Motion-Activated Garage Door System with Parking Detection and IOT Notification
Article Sidebar
Main Article Content
Traffic has been a prevalent issue since the introduction of automobiles, and many countries face it; one of its root causes is car parking. Improper parking of vehicles more often than not causes traffic congestion in urban areas, as it is usually parked on sidewalks that obstruct not only pedestrian walkways but also the road that vehicles use. Parking garages should be required for every vehicle owner, whether it be a motorcycle or, most importantly, an automobile.
This research paper discusses the process and methods used to develop a motion-activated garage door system with parking detection and IoT notification, with a focus on improving convenience, safety, and accessibility in homes. The design uses an ESP32 microcontroller, an ultrasonic sensor to enable the door to respond to motion, another ultrasonic sensor to detect whether a parked car is inside the garage, a buzzer for sound cues, and a servo motor.
Downloads
References
Faroqi, A., Fitriadi, A., Adiningsih, N. U., & Ramdhani, M. A. (2018). Automatic door control system using SMS gateway based on Arduino Uno and ultrasonic sensor. International Journal of Engineering and Technology, 7(3.4), 122–126.
Gupta, A., Sharma, R., Verma, S., & Singh, P. (2020). Design analysis of an automatic garage door opener. International Journal of Trend in Scientific Research and Development. https://www.ijtsrd.com/papers/ijtsrd31118.pdf
Imania, S. N., Ghofur, A., & Lazim, F. (2024). Arduino-based automatic door opening and closing prototype design using ultrasonic sensors. G-Tech: Jurnal Teknologi Terapan, 8(3), 1386–1395.
Kiran, B. (2018). Motion-based automatic garage door opener. International Journal of Engineering Technology and Applied Science, 5(2).
Orji, R. O., Oleka, C. V., & Nduanya, U. C. (2019). Arduino-based door automation system using an ultrasonic sensor and servo motor. Journal of Scientific and Engineering Research.
Sahu et al. (2024). Automatic door control systems with Arduino microcontrollers. IJSART, V10I3.
Sharma, V., Patel, A., & Mehta, R. (2024). Object tracking system using Arduino and an ultrasonic sensor. ResearchGate.
Susilo, S., Listijorini, E., Ardiansyah, F., & Ula, S. U. (2023). Design of an automatic sliding door based on Arduino using ultrasonic sensors. DINAMIS, 11(1), 43–47.
Suryawanshi, R., Thosar, A., Singh, A., & Mehendale, N. (2024). Object detection system using Arduino and an ultrasonic sensor. SSRN. https://papers.ssrn.com/sol3/papers.cfm?abstract_id=5009923
Madhavi, A., Uniyal, D., Jula, A., Sri, T., Vadlapatla, S., & Bonam, J. N. (2023). Smart parking assistant: Integrating ultrasonic sensors and IoT for enhanced driver experience. E3S Web of Conferences. https://doi.org/10.1051/e3sconf/202339101143
Geetha, M. (2020). IoT-based car parking using Arduino and the Blynk application. International Journal for Research in Applied Science and Engineering Technology. https://doi.org/10.22214/ijraset.2020.6119
Rudi, R., Dinata, I., & Kurniawan, R. (2017). Rancang bangun prototipe sistem parkir pintar berbasis IoT.
Aziz, F. A. A., Muji, S. Z. M., Wahab, M. H. A., Tukiran, Z., Uttrapan, C., & Sudin, N. (2022). Smart parking system mobile application using an ultrasonic detector. International Journal of Integrated Engineering. https://doi.org/10.30880/ijie.2022.14.03.008
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in our journal are licensed under CC-BY 4.0, which permits authors to retain copyright of their work. This license allows for unrestricted use, sharing, and reproduction of the articles, provided that proper credit is given to the original authors and the source.